Base Suv 4.0l Cd Convenience Package 6 Speakers Am/fm Radio Mp3 Decoder on 2040-cars

Auto blog

2.1 million vehicles recalled again over faulty airbags

Fiat Chrysler Automobiles, Honda and Toyota will recall 2.1 million vehicles to fix faulty airbag modules "after the manufacturers' original attempts to fix the defects proved ineffective in some vehicles." These vehicles had all previously been recalled, but the National Highway Traffic Safety Administration found that the airbags could still potentially malfunction. This recall will cover Acura MDX, Dodge Viper, Jeep Grand Cherokee, Honda Odyssey, Pontiac Vibe, Toyota Corolla, Toyota Matrix and Toyota Avalon models made in the early 2000s. NHTSA has reportedly received about 40 reports of airbag deployment in such vehicles, even though the vehicle had not been involved in a crash. Roughly one million of these same vehicles, all from Honda and Toyota, are also subject to recalls due to faulty Takata airbag modules, though this particular recall is for "an electronic component manufactured by TRW" that is separate from the actual airbags from Takata. According to NHTSA Administrator Mark Rosekind: "This is unfortunately a complicated issue for consumers, who may have to return to their dealer more than once. But this is an urgent safety issue, and all consumers with vehicles covered by the previous recalls should have that remedy installed. Even though it's a temporary solution until the new remedy is available, they and their families will be safer if they take the time to learn if their vehicle is covered and follow their manufacturers' instructions. A hassle is much better than a family tragedy." If you're the owner of an affected car, expect to hear more from the official automaker and government channels in short order. In the meantime, we'd suggest getting your car checked and fixed at your local dealer. The official statement and recall information can be found below. Previously Recalled Vehicle Remedies Not Working as Designed; NHTSA Announces Follow up Recall of 2.12 Million Cars and SUVs Saturday, January 31, 2015 Contact: Gordon Trowbridge, 202-366-9550, Public.Affairs@dot.gov WASHINGTON – U.S. Transportation Secretary Anthony Foxx announced today the recall of more than 2.12 million Acura, Dodge, Jeep, Honda, Pontiac, and Toyota vehicles for a defect that may cause airbags to deploy inadvertently. The recalls will provide vehicle owners with a new remedy after the manufacturers' original attempts to fix the defects proved ineffective in some vehicles.

Toyota recalls power window switches for 6.5 million vehicles [UPDATE]

UPDATE: There was one incident of someone in the US getting a burn to the hand from this issue Toyota spokesperson Cindy Knight tells Autoblog that. "We have 11 reports where part of the door trim and/or switch was burnt," she said. The company isn't aware of any crashes from the problem, though. Because of a potential short circuit in the driver's side power window switch, Toyota is recalling 6.5 million vehicles worldwide, Reuters reports. Of those, the automaker says around 2 million are in the US. The affected models here are: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD According to Toyota, the switch might not have received adequate lubricant grease during manufacturing, and over time this could lead to a short circuit. In a worst-case scenario, the part might even overheat, melt and cause a fire. As a fix, dealers will inspect the component on these vehicles and apply heat-resistant grease to it, and any broken examples will have an internal circuit board replaced. Toyota already issued one recall for this problem in 2012 when it had to repair 7.5 million vehicles globally from the 2007-2009 model years, including 2.5 million in the US. These latest models had the grease applied in a different way. Related Video: Toyota Recalls Certain Vehicles for Power Window Master Switch October 21, 2015 TORRANCE, Calif., Oct. 20, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 2,000,000 vehicles related to the driver's side Power Window Master Switch. The involved vehicles include certain: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD The Power Window Master Switch in the involved vehicles may have been manufactured with insufficient lubricant grease. If not enough grease is applied, under certain conditions the switch may develop a short circuit that can cause the switch assembly to overheat and melt. A melting switch can produce smoke and potentially lead to a fire. Toyota previously recalled certain 2007-2009 model year vehicles for a similar condition.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.