2023 Toyota Camry Se on 2040-cars

Auto blog

CARB uses tricked-out RAV4 EV to measure air pollution in California

The old-school Toyota RAV4 EV you see above is the California Air Resources Board's version of a non-participant observer. The all-electric vehicle cruises around the state measuring airborne pollution. Since it's powered by batteries, there are no tailpipe emissions created as CARB tries to get a handle on how dirty the roadway air is. The problem, CARB says, is that it is difficult to measure air pollution levels, "during calm conditions at night and in the early morning." There are over 250 stationary air monitoring sites in California today, but the Board wanted a way to expand where and when it can test for things like ultrafine particles, carbon dioxide and nox. The original plan for the Mobile Monitoring Platform – as the RAV4 EV is officially called – was to "Investigate Spatial, Diurnal and Seasonal Pollution Gradients" on California's highways and ports. The RAV4 EV was originally expected to cost $280,000 (see pages 11-12 in this PDF from 2009), but a new report in the Modesto Bee says it had a total of $300,000 just in monitoring equipment. Michael Benjamin, CARB's chief of air monitoring, told the Bee that the MMP, "paints a thorough picture about what air quality is in any given community." More importantly, the stationary and mobile testing equipment can tell CARB when and where the air is getting cleaner. Which is the whole point, after all.

Fewest vehicles ever found eligible for Most American survey

Once again, the most American car on the market is from an American brand. The Ford F-150 retained its number one spot in Cars.com's annual survey of the most American vehicles, trumping the Toyota Camry, which remains at number two.
Ford taking the top spot is small consolation, though, as the Detroit Three aren't too well represented here. General Motors scored a win at number seven, with the Chevrolet Corvette, while Chrysler squeaked in at number ten, with the Dodge Viper. Outside of those three vehicles, Toyota and Honda dominate the top ten.
What's most remarkable, though, is that there were so few cars available for this year's list.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.