1991 Toyota 4 Runner 4wd $4000 Motor Rebuilt In January 2013 on 2040-cars

Auto blog

Toyota casts off in Ponam-31 motor yacht [w/video]

Some Japanese automakers focus purely on cars, while others dabble in all sorts of motorized transportation. Honda, for example, makes everything from motorbikes to jet aircraft. But while Toyota may be known principally for automobiles, it also makes a line of boats. And this is the latest.
The new Toyota Ponam-31 motor yacht is built around an aluminum hull with a flybridge and cockpit rear deck layout, similar to the Carver 32 on which this writer spent his childhood summers. It measures 31 feet overall and is powered by a pair of 3.0-liter turbodiesel four-cylinder engines derived from the Land Cruiser Prado (known in these parts as the Lexus GX 460) but marinized for nautical application. Toyota has even equipped its new Sports Utility Cruiser with such features as Drive Assist and a Virtual Anchor System.
Toyota expects to sell around 15 units of the Ponam-31 through its network of 49 dealers across Japan, with prices starting at 29,700,000 yen (about $27,500 at today's conversion rates). Scroll down below for a video, along with a press release, meant to show potential customers what's waiting for them.

Average transaction prices climb to a record $36,270 in January

The automotive sector made a hash of the numbers last month, a mess of pluses and minuses clogging the transaction-price charts according to Kelley Blue Book. The overall industry rose one percent, even though buyers bought fewer cars and light vehicles in January 2018 vs 2017 using the selling-day adjusted rate. Due to January transaction prices rising to $36,270, a record for January, the value of new vehicles sold climbed more than $1 billion compared to January 2017. KBB's transaction prices don't include customer incentives, which changes the complexion slightly; average incentive spending rose to just over ten percent. The average transaction price in December 2017 was $36,756, so January dropped a bit - nothing unexpected, with the month annually blamed for "January doldrums." More revealing is the fact that the average transaction price in January 2017 was $34,910. This year's plumped-up figure came courtesy of the continued shift to crossovers, SUVs, and light trucks, which shouldn't surprise anyone who's read an automotive blog in the past 20 years. That category comprised nearly 70 percent of new vehicle sales for the month. Some manufacturers profited more than others, though. Fiat Chrysler managed 12.8 percent fewer sales in January compared year-on-year, but the company's vehicles sold for $1,300 more. The Ford brand suffered a 6.3-percent dip in sales, but brand transaction prices increased $2,000, while a Lincoln sold for $8,700 more on average. General Motors sold more cars and sold them for more money; overall GM transaction prices rose four percent, or $1,270, while a GMC traded hands for seven-percent more than in January 2017 and a Cadillac got $2,300 more on average. Of KBB's listed automakers, the Volkswagen Group got the most of out its customers, transaction prices rising at the German automaker by 5.6 percent to $42,243 in January 2018 compared to a year earlier. American Honda followed with a 4.3-percent increase to $28,991, GM in third at 4.1 percent to $40,313. Find your next car at Autoblog using our new and used car listings or the Car Finder tool. Broken out by segment, minivans rocked the table, transaction prices leaping by 7.9 percent to $35,380 compared to January a year earlier. Luxury cars boasted the next-highest rise, at 3.6 percent to $58,533.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.