Phantom,piano Black Veneer,theater Configuration,camera System Front And Rear) on 2040-cars

Auto blog

The latest Rolls-Royce concept is a hybrid dump truck

Is a standard Rolls-Royce not big and imposing enough for you? Perhaps the company's latest concept can get you to pass the Grey Poupon. Behold, the Rolls-Royce MTU hybrid haul truck. The Cullinan might come with 22-inch rims, but when equipped with its R63 Michelin XDRs, each wheel and tire combo of the ultimate Roller will stand over 13 feet tall. With a driver's seat a full story off the ground, it's so lofty you won't even see the plebes that you crush in their feeble Coachbuild Dawns as indifferently as Loxodonta africana steamrolls a line of ants. Serve as your own life-size Spirit of Ecstasy as you look down at the puny Parthenon radiators of run-of-the-mill Phantoms from atop your soaring grille, located a full flight of stairs above the lowly earth. All jokes aside, the Rolls-Royce truck mainly serves to promote its new MTU V12 2000-series industrial 12-cylinder engines. Rolls-Royce doesn't even produce the haul trucks; typically, they provide the engines for installation into rigid dumpers built by Liebherr, Hitachi, or Selex. The new hybrid mill produces 1,560 horsepower, meant to replace the V16 4000-series 16-cylinder engines making 2,500 horsepower. However, Rolls-Royce says performance will be the same while dropping carbon dioxide emissions by 30 percent in new installations, or 22 percent with retrofits. Like a Prius, the engine uses a battery pack to store regenerative energy captured as the trucks descend into quarries, then expends that juice to climb back up. It also requires no additional space for an exhaust gas treatment system or diesel urea additives, which are apparently concerns in a mining truck. In addition, Rolls-Royce is in the process of engineering its industrial engines to run on sustainable fuels such as hydrogen brewed from renewable energy (not the way we do it in the U.S.). The company hopes to have hydrogen fuel engines ready by 2023 in stationary applications. It's all part of the company's goals for a — say it with us — carbon-neutral future. The concept truck was conceived for MINExpo 2021, a mining convention taking place September 26-29 in Las Vegas. Hopefully they'll put it into production and offer a constellation headliner in the cab.

Rolls-Royce could go electric, if battery tech advances

After toying with the idea a few year ago, Rolls-Royce isn't ready to completely give up on the idea of an electric model quite yet. Still, a hyper-luxurious EV from the opulent brand might not happen any time soon. "Suppose we find a battery technology that can offer ranges that are acceptable to our customers," brand boss Torsten Muller-Otvos said, according to Automotive News. "I can definitely imagine a fully electric Rolls-Royce." Muller-Otvos was clear that no final decision on an EV or even a much-rumored plug-in hybrid has been made yet. Rumors of an EV from the brand go back years. At the 2011 Geneva Motor Show, Rolls-Royce showed that it wasn't completely against going electric. The 102EX concept (pictured above) was based on a Phantom but with two, 194-horsepower electric motors and a 71-kWh battery to power them. The company claimed the behemoth had an estimated range of 124 miles and could hit 60 miles per hour in under eight seconds. At least one journalist even got to drive it. However, the brand's wealthy customers reportedly weren't convinced, and the project was canned. In 2014, several reports began suggesting a plug-in hybrid Rolls under development that would answer concerns about range and charging time amongst the clientele. This powertrain could debut on the next-gen Phantom around 2017, and it's likely to be borrowed from parent company BMW.

2021 Rolls-Royce Ghost makes its debut with fresh styling and a real Rolls platform

After just over 10 years, the Rolls-Royce Ghost is getting its second generation. This is an important moment, since the Ghost has been the luxury brand's bestseller. The result is a car that has changed significantly underneath to refine the things owners will see and experience. The exterior styling doesn't look drastically different at first, but looking closer reveals many significant changes. The trademark Rolls-Royce grille is wider and taller, and doesn't have a thick arcing border around it. The headlights are larger with sharper corners and angled slightly to sweep up towards the corners of the fascia. Moving along the sides show a similar profile to the old car, but the tail's trunk lid leans forward, as do the taillights. There's not a distinct ledge to the rear bumper, either, giving this new Ghost a sportier appearance. An extra bit of flair Rolls-Royce added is the illuminated grille. There are 20 LED lights in the top part that shine down onto the grille slats, which in turn reflect light outward. Under this new skin is a chassis that's exclusive to Rolls-Royce, unlike the old Ghost's BMW 7 Series-derived chassis. This new frame uses the flexible all-aluminum platform that underpins the new Phantom and the Cullinan. The car is also larger than its predecessor with 3.5 more inches of length and 1.2 inches of width. It all sits on independent air suspension at all four corners featuring some upper wishbone dampers at the front that Rolls-Royce says helps improve ride quality, though hasn't revealed detailed information on how it does so. It's supported by software that coordinates the reactions dictated by the suspension sensors, drive settings, all-wheel drive, four-wheel-steering (both new features for the Ghost), and even the navigation-controlled transmission to optimize driving performance and comfort. Powering the Ghost is Rolls-Royce's twin-turbocharged 6.75-liter V12. It makes 563 horsepower and 627 pound-feet of torque. Obviously only an automatic transmission is available, and power goes to all four wheels as previously mentioned. The Ghost's interior takes cues from the Phantom, with a full-width section encompassing the instruments, infotainment and an artistic dash panel, which we'll talk more about in a moment. Below that is a wood-finished panel incorporating some air vents and controls. Open-pore woods are available, including one that features aluminum in the wood grain.