2023 Ram Promaster High Roof on 2040-cars

Auto blog

Stellantis not looking for further mergers, including with Renault

MILAN — Stellantis Chairman John Elkann on Monday denied the carmaker was hatching merger plans, responding to press speculation about a possible French-led tie-up with rival Renault. Elkann said that the Peugeot owner, the world's third largest carmaker by sales, was focused on the execution of its long-term business plan. "There is no plan under consideration regarding merger operations with other manufacturers," said Elkann, who also heads Exor, the Agnelli family holding company that is the largest single shareholder in Stellantis. After abandoning the Russian market, at the time its second largest after France, and reducing the scope of its global cooperation with Nissan, Renault has been seen as a potential M&A target. Speculation intensified after an electric vehicle market slowdown forced it last week to cancel IPO plans for its EV and software unit Ampere. Its market cap remains stubbornly low at little over 10 billion euros ($10.8 billion) despite a financial recovery over the past few years. Stellantis, the product of a 2021 merger between France's PSA and Fiat Chrysler and one of the most profitable groups in the industry, has a market cap of more than 85 billion euros when unlisted shares are factored in. It has a 14 brand portfolio also including Citroen, Jeep, Opel and Alfa Romeo. NEWSPAPER REPORT Italian daily Il Messaggero had said on Sunday that the French government, which is Renault's largest shareholder and also has a stake in Stellantis, was studying plans for a merger between the two groups. A spokeswoman for Renault said on Monday the group did not comment on rumors. France's Finance Ministry had declined to comment on Sunday. Stellantis has crossed swords with the Italian government, which has accused it of acting against the national interest on occasions. Industry Minister Adolfo Urso last week raised the prospect of the Italian government taking a stake in Stellantis to help to balance the French influence. Renault shares pared gains after Elkann's comments to stand 1.2% higher by 1220 GMT, having initially risen more than 4%. Stellantis CEO Carlos Tavares, a Portuguese-national, last week said in an interview with Bloomberg that the group was "ready for any kind of consolidation" and that its job was to make sure that it would be "one of the winners". Analysts, however, question the rationale of a Stellantis-Renault merger, which would also expand the group's excess capacity in Europe.

FCA recalls Ram dualie chassis cabs to recalibrate top speed

If you're one of the 1,771 owners of a 2014-15 Ram 4500 or 5500 chassis cab with a 6.4-liter Hemi V8 and a dualie rear axle, you may be hearing soon from Fiat Chrysler Automobiles to bring your truck in to your local dealer. The reason, you ask? To have the speed limiter recalibrated. The problem, according to the statement below, is that while some of these trucks are electronically limited to 106 miles per hour, their tires can't safely maintain that speed. As a result, FCA is having dealers recalibrate the limiter to 87 mph. Of course, that's still well above the speed limit in most places, and "FCA believes it is unlikely that these trucks are operated at such speeds," but that it "is acting out of an abundance of caution." In addition to the 1,771 units in the United States, the company is recalling another 169 in Canada. In an unrelated campaign, FCA is also recalling a handful or two of 2015 Dodge Challengers – 72 in the US, six in Canada and three in Mexico – to secure a side-curtain airbag bolt that may have been improperly installed during assembly over the course of a ten-day period. In both cases, FCA says it is unaware of any complaints, accidents or injuries related to these issues. Statement: Speed Recalibration May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,771 trucks in the U.S. to recalibrate their maximum speed. The dual-wheel trucks are currently restricted to a top speed of 106 miles per hour (mph), but an internal specification review revealed top speed should be set at 87 mph, in accordance with their factory-equipped tires. The Company is unaware of any related injuries, accidents or customer complaints. Dealers will recalibrate vehicle speed accordingly. While FCA believes it is unlikely that these trucks are operated at such speeds, and that doing so would exceed posted speed limits in nearly every applicable jurisdiction, the Company is acting out of an abundance of caution. The campaign is limited to certain model-year 2014-15 Ram 4500/5500 Chassis Cabs equipped with 6.4-liter HEMI V-8 engines. An additional 169 vehicles are believed to be in Canada. Affected customers will be advised when they may schedule service. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403. ### Statement: Bolt May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 72 cars in the U.S.

2020 Ram 3500 heavy duty interior spied

The 2020 Ram 2500 and 3500 trucks continue their steady testing regimen, and the engineers are still keeping the trucks under careful wraps. Or at least they are with the outside. As the photos above show, some test drivers got a little sloppy with interior coverings, and our spy photographer took advantage of the situation. And the good news is that the interior will be basically identical to that of the 2019 Ram 1500. We say good news because the Ram's stylish interior and well-thought-out controls are part of why it's our favorite fullsize pickup right now. This particular model has the 8.4-inch UConnect touchscreen infotainment. Since the entire center stack is the same as the 1500, we wouldn't be surprised if the monster 12-inch display were to be available on high-end trims. The small 5-inch infotainment will probably be the standard option. Another interesting detail is that this test truck does not have the rotary shift dial shared with the Ram 1500 and various other Chrysler products. Instead, it has a traditional steering column-mounted shift lever. As for the outside, nothing new is revealed to us. We shouldn't have to wait too long to see the production truck, though. We expect it to be revealed early next year. What we've seen so far seems to indicate that the heavy duty Rams will have styling a little closer to the old model than to the new 1500. Still, expect grilles and other cues from the lighter duty model, just translated to a slightly different shape. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.