2014 Ram 3500 Tradesman on 2040-cars

Auto blog

2014 Ram ProMaster 2500

Front-wheel drive is what sets the all-new Ram ProMaster full-size commercial van apart from its competition. In a segment still choked with thirsty, rear-wheel-drive, ladder frame, pickup truck-based cargo vans, the American automaker is introducing something entirely new - well, new to our domestic market, as Europeans will recognize Ram's fresh entrant as a made-for-USA Fiat Ducato.
While the big ProMaster doesn't have a traditional body-on-frame chassis, it isn't a pure unibody either. Consider it a hybrid of both, with a unibody cab up front and a reinforced high-strength steel subframe in the rear. The platform employs double A-arms and MacPherson struts on the front axle, while the rear uses a simple tubular beam axle. Tires are 225/75R16 at all four corners. The steering is hydraulic rack-and-pinion (allowing an impressive 36-foot turning radius) and there are disc brakes with two-piston calipers all around. It is a solid, if unsophisticated, setup.
This game-changing van, which has already arrived in showrooms with a starting price of $28,630, is propelled by either a gasoline-powered 3.6-liter Pentastar six-cylinder (280 horsepower and 258 pound-feet of torque) or a new turbocharged 3.0-liter four-cylinder diesel (174 horsepower and 295 pound-feet of torque). Ram will offer a traditional six-speed automatic or a new six-speed automated single-clutch manual transmission that drops the hydraulic linkage to improve fuel economy - details are still emerging on this unique gearbox.

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

Ram readying radical two-way split tailgate?

Ram may be preparing a new sort of tailgate that could rethink the way we access the bed of the company's pickup trucks. Rather than the typical fold-down tailgate that we know so well, patent drawings show a tailgate that combines the functionality of a traditional fold-down design with a 50/50 split that can, individually, be opened like a barn-door design or dropped flat like a standard tailgate.
Now, Ram is far from the first to toy around with something like this. The most obvious example is the Honda Ridgeline, which features a single-piece tailgate that is double-hinged so that it can open traditionally or be swung out to the side. The big news here is the split and the fact that each half can be used independently of the other. Unlike the Honda, the individual halves would be operated via touchpads.
The implications of this new design aren't entirely clear right now. It seems possible that the rendering could just be for a concept vehicle, but production is certainly possible as well - Ram has shown a real willingness to innovate in the pickup segment as of late, with features like coil-spring rear suspensions, light-duty diesels and the Ram Box bedside storage system.