2013 Drw St Crew 4x4 Uconnect Voice Chrome Cummins Diesel Lifetime Warranty on 2040-cars

Auto blog

Chrysler to replace transmissions on 159 2014 Ram 1500s

Some recalls we report on are bigger than others. This one involves a big vehicle, but only 159 of them. No, not 159,000. Just 159.
The vehicle in question is the Ram 1500 - specifically the 2014 model, and more specifically than that, those made over the course of 12 days in late January and early February of this year. According to the statement below, Chrysler was notified by one of its transmission suppliers that a small shipment of gearboxes might have difficulty shifting into Park.
Although the Auburn Hills, MI-based automaker says it is unaware of any accidents or injuries having resulted from the issue, and has not received any specific complaints, it is notifying the owners of the 159 trucks in question to bring their pickups in for service and, if necessary, to have the entire transmission replaced.

Here's how I averaged 31.5 mpg in a Ram HFE EcoDiesel

Few things could be more American than a bright red Ram pickup parked in front of Mount Rushmore. To get there and back on a single tank of fuel from the nearest major city, however, requires a collaboration of international proportions. This particular Ram is a 1500 HFE EcoDiesel, festooned with badges indicating the presence of an Italian turbodiesel V6 mated to a German eight-speed automatic. Some Rams are even built in Mexico, but this one only boasted a 27 percent Mexican parts content. A rather global truck, this one. It is the sum of its parts, but those bits and pieces were curated by a team of engineers in Michigan. At the risk of hipstering its history, the Ram HFE (High Fuel Efficiency) package was truly custom-tailored for one purpose: Achieving an EPA-rated 29 mpg on the highway, which is 1 mpg better than a standard Ram 1500 EcoDiesel. It did just that. No, it did better than that, but more on that in a minute. The Ram has stuck with its "son of big rig" styling for nearly 25 years; opting for the EcoDiesel V6 means you can fill up next to Peterbilts. My goal was to bypass truck stops entirely. I left Denver early in the morning and aimed to enjoy lunch with Washington, Jefferson, Roosevelt, and Lincoln looking over my shoulder before heading home for dinner. Mt. Rushmore is about 370 miles away from the northernmost truck stop within Denver, where I filled the Ram HFE's tank and headed northbound on Interstate 25 toward Wyoming and a series of smaller highways that roughly follow an old stagecoach route from Cheyenne to what is now Mt. Rushmore in South Dakota. The Ram was such a fuel miser that I could have driven an extra 50 miles each way and still avoided the pumps. It's beautifully stark country: the kind of desolate place where the FM radio does a lot of seeking; that's all the audio I had on board because the Ram HFE is decidedly lacking in comfort and convenience features. To get to an EPA-estimated 29 mpg highway figure, Ram engineers had to goals: To strip weight and improve aerodynamics. In the wind tunnel, the medium-size 4x2 Quad Cab with 20-inch wheels and the Ram Express trim level's one-piece front bumper proved the most aerodynamic configuration of the many flavors of Ram available. Interestingly, testing revealed that adding full-length tubular side steps and a tri-fold tonneau cover normally offered in the Mopar accessories catalog aid aerodynamics.

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.