2014 Ram 2500 Slt on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

The 2019 RAM 1500 gets a torque boost with the new eTorque system

The Ram is all new for 2018. The 1500 will come in two engine versions, a 3.6-liter V6 and a 5.7-liter V8. An eTorque system will add an extra 90 pound-feet of torque in the V6 and 130 in the V8. And it will get a massive 12-inch touchscreen. For more coverage of the NAIAS 2018 head over to https://www.autoblog.com/detroit-auto-show/ Detroit Auto Show RAM Truck Autoblog Minute Videos Original Video

Chrysler set to make $266M-investment into 8-speed transmission production

Chrysler will shortly make a significant $266-million investment into its Kokomo, IN transmission factory in a bid to expand production of its eight-speed automatic transmissions. The gearboxes, which are built under license from Germany's ZF Friedrichshafen, have been well received by customers and critics, and according to an SEC filing obtained by Automotive News, the transmissions will eventually find their way to all of Chrysler's rear-drive offerings (Viper and heavy-duty Ram models, aside). According to AN, a Chrysler spokesman says the investment has not been confirmed, but once it is, it'll mark the company's latest in a growing line of investments at the facility. Chrysler has poured $1.5 billion into Kokomo since 2009.