12 Ram 2500 Laramie 4x4 Crew Cab Diesel Leather Ac Seats Sunroof Nerf Bars on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

A plea for Ram to build the Hellcat-powered Rebel TRX concept

The Rebel TRX Concept is a high-performance off-roader with a supercharged 6.2-liter Hemi V8 that's capable of traveling at speeds of up to 100 miles per hour on rough terrain. There's only one other road-legal machine that has the same off-roading capabilities as the concept – ahem, the Ford F-150 Raptor – and if there's ever been a vehicle that Ram needs to build, it's this one. The market is saturated with pickup trucks of various sizes. Ram itself offers options for consumers looking to tow massive cargo or go off-roading with the Power Wagon and Rebel. But there's also a clear market for the hardcore off-roader, and the Raptor has gone unchallenged for too long. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Ford proved that the market could handle a fast off-road truck with the 2010 SVT Raptor. Demand for the vehicle skyrocketed and after a few years, Ford had to up production from three to five trucks per hour at its Dearborn Truck Plant in 2013. The original V8 model immediately gained stardom for being a purpose-built machine capable of tackling rough terrain at high speeds. The latest 2017 Raptor is shaping up to be a brute in its own right. Gone is the 6.2-liter V8, which has been replaced with a modern twin-turbocharged 3.5-liter V6. Despite having a much smaller engine than its predecessor, the upcoming Raptor boasts better performance at 450 horsepower and 510 pound feet of torque – up from the V8's output of 411 horsepower and 434 pound feet of torque. With Fox lending a hand with some high-performance shocks and the pickup truck getting various off-roading modes, including one called "Baja," few road-legal machines will be able to match 2017 Raptor when asphalt runs out. Even still, the Rebel TRX concept looks and sounds like it's in a different league. The Rebel TRX concept's design is the perfect combination of speed and looks, which makes it hard to believe that Ram built the concept in just three months, according to an engineer. A higher-up within FCA sent in the demand, and the Ram team obliged with a fully functioning prototype. The Rebel, which Ram has always said is not a Raptor-fighter, can be fitted with the 5.7-liter Hemi V8, while the larger Power Wagon is equipped with the 6.4-liter V8. The supercharged 6.2-liter V8 (the Hellcat engine), as an engineer points out, makes sense in the concept.

FCA shifts Ram Heavy Duty trucks from Mexico to U.S., creating 2,500 jobs

DETROIT — Fiat Chrysler Automobiles said on Thursday it will shift production of Ram Heavy Duty pickup trucks from Mexico to Michigan in 2020, a move that lowers the risk to the automaker's profit should President Donald Trump pull the United States out of the North American Free Trade Agreement. Fiat Chrysler said it would create 2,500 jobs at a factory in Warren, Michigan, near Detroit, where the Ram 1500 is currently built, and FCA will invest $1 billion in the facility. The Mexican plant will be "repurposed to produce future commercial vehicles" for sale global markets. Mexico has free trade agreements with numerous countries. Fiat Chrysler Chief Executive Sergio Marchionne a year ago raised the possibility that the automaker would move production of its heavy-duty pickups to the United States, saying U.S. tax and trade policy would influence the decision.If the United States exits NAFTA, it could mean that automakers would pay a 25 percent duty on pickup trucks assembled in Mexico and shipped to the United States. About 90 percent of the Ram pickups made at Fiat Chrysler's Saltillo plant in Mexico are sold in the United States or Canada, company officials said. Negotiators for the United States, Mexico and Canada are scheduled to meet later this month for another round of talks on revising NAFTA. Canadian government officials earlier this week said they are convinced that Trump intends to announce his intention to quit the agreement. Trump has threatened to force the rollback of NAFTA, which enables the free flow of goods made in the United States, Canada and Mexico across the borders of those countries. He also has criticized automakers for moving jobs and investment in new manufacturing facilities to Mexico and prodded them to add more auto production in the United States. View 31 Photos On Wednesday, Toyota and Mazda announced they would build a new $1.6 billion auto assembly plant in Alabama, drawing praise from Trump. Vice President Mike Pence praised Fiat Chrysler's announcement. "Manufacturing is back. Great announcement. Proof that this admin's AMERICA FIRST policies are WORKING!" Pence said in a Twitter posting. Chrysler raised its output in Mexico by 39 percent in 2017 to 639,000 vehicles, according to Mexican government data. That made Fiat Chrysler the third-largest producer of vehicles in Mexico in 2017, after Nissan and General Motors.