2wd 140.5 on 2040-cars

Auto blog

2019 Ram 1500 V8 First Drive Review | New pickup has more of everything

SCOTTSDALE, Ariz. – There's a lot going on with the 2019 Ram 1500: inside, outside, out back, and under the hood. New engine options — two of which feature 48-volt eTorque assistance for extra grunt — and lots of attitude-heavy trims. But our first experience with the '19 Ram is focused on the totality of the truck experience — taking a step back, a deep breath of desert air, and soaking it all in. Ram is staking out a fascinating niche in an incredibly competitive segment. More than anything, this is a very comfortable truck, and that's exactly what it needs to be. Remember, Ram ditched leaf springs for coil springs 10 years ago, figuring a smoother ride outweighed the cost. That didn't make it less truckish, since capabilities also increased. And the same goes here: The suspension geometry is tweaked even further, giving it better control over speed bumps in the Phoenix suburbs as well as the desert washes, guarded by saguaro sentinels. Lest you think this means the 1500 gives up anything on its predecessor, properly equipped the '19 can tow up to 12,700 pounds. Yes, with the 1500 ... not a dual-axle, heavier-grade 3500 or something. Maximum payload is up to 2,320 pounds, too — although that rating is only for a 3.6L 4x2 with a 3.55 rear end. There's got to be a tradeoff, right? Maybe Ram pinched the interior to save weight. Nope — both the Quad and Crew cabs are bigger. The Crew Cab grows more, though, with 4 extra inches of extra wheelbase finding its way into the massive space behind the front seats — there's 45.2 inches of legroom back there, which is about 5 inches more than before. This process of critically assessing the Ram, looking for clues that something was worse or amiss, simply came up empty. The only area the 1500 seems to show weakness is in pricing — generally it's more expensive across the board, by a few hundred dollars, although some of that is offset by favorable options packaging or additional content. And, of course, with increased complexity there's the potential for higher running costs down the road — something we can't evaluate until these trucks have been on the road for years. Back to the present: The conclusion we came to is that Ram simply invested in multiple areas in this truck. A bit of the cost is passed onto the buyer, but not as much as you'd think. To translate from beancounter: Pay a little bit more, get a lot more.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

FCA shifts Ram Heavy Duty trucks from Mexico to U.S., creating 2,500 jobs

DETROIT — Fiat Chrysler Automobiles said on Thursday it will shift production of Ram Heavy Duty pickup trucks from Mexico to Michigan in 2020, a move that lowers the risk to the automaker's profit should President Donald Trump pull the United States out of the North American Free Trade Agreement. Fiat Chrysler said it would create 2,500 jobs at a factory in Warren, Michigan, near Detroit, where the Ram 1500 is currently built, and FCA will invest $1 billion in the facility. The Mexican plant will be "repurposed to produce future commercial vehicles" for sale global markets. Mexico has free trade agreements with numerous countries. Fiat Chrysler Chief Executive Sergio Marchionne a year ago raised the possibility that the automaker would move production of its heavy-duty pickups to the United States, saying U.S. tax and trade policy would influence the decision.If the United States exits NAFTA, it could mean that automakers would pay a 25 percent duty on pickup trucks assembled in Mexico and shipped to the United States. About 90 percent of the Ram pickups made at Fiat Chrysler's Saltillo plant in Mexico are sold in the United States or Canada, company officials said. Negotiators for the United States, Mexico and Canada are scheduled to meet later this month for another round of talks on revising NAFTA. Canadian government officials earlier this week said they are convinced that Trump intends to announce his intention to quit the agreement. Trump has threatened to force the rollback of NAFTA, which enables the free flow of goods made in the United States, Canada and Mexico across the borders of those countries. He also has criticized automakers for moving jobs and investment in new manufacturing facilities to Mexico and prodded them to add more auto production in the United States. View 31 Photos On Wednesday, Toyota and Mazda announced they would build a new $1.6 billion auto assembly plant in Alabama, drawing praise from Trump. Vice President Mike Pence praised Fiat Chrysler's announcement. "Manufacturing is back. Great announcement. Proof that this admin's AMERICA FIRST policies are WORKING!" Pence said in a Twitter posting. Chrysler raised its output in Mexico by 39 percent in 2017 to 639,000 vehicles, according to Mexican government data. That made Fiat Chrysler the third-largest producer of vehicles in Mexico in 2017, after Nissan and General Motors.