2013 Ram 1500 Slt on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Here's how I averaged 31.5 mpg in a Ram HFE EcoDiesel

Few things could be more American than a bright red Ram pickup parked in front of Mount Rushmore. To get there and back on a single tank of fuel from the nearest major city, however, requires a collaboration of international proportions. This particular Ram is a 1500 HFE EcoDiesel, festooned with badges indicating the presence of an Italian turbodiesel V6 mated to a German eight-speed automatic. Some Rams are even built in Mexico, but this one only boasted a 27 percent Mexican parts content. A rather global truck, this one. It is the sum of its parts, but those bits and pieces were curated by a team of engineers in Michigan. At the risk of hipstering its history, the Ram HFE (High Fuel Efficiency) package was truly custom-tailored for one purpose: Achieving an EPA-rated 29 mpg on the highway, which is 1 mpg better than a standard Ram 1500 EcoDiesel. It did just that. No, it did better than that, but more on that in a minute. The Ram has stuck with its "son of big rig" styling for nearly 25 years; opting for the EcoDiesel V6 means you can fill up next to Peterbilts. My goal was to bypass truck stops entirely. I left Denver early in the morning and aimed to enjoy lunch with Washington, Jefferson, Roosevelt, and Lincoln looking over my shoulder before heading home for dinner. Mt. Rushmore is about 370 miles away from the northernmost truck stop within Denver, where I filled the Ram HFE's tank and headed northbound on Interstate 25 toward Wyoming and a series of smaller highways that roughly follow an old stagecoach route from Cheyenne to what is now Mt. Rushmore in South Dakota. The Ram was such a fuel miser that I could have driven an extra 50 miles each way and still avoided the pumps. It's beautifully stark country: the kind of desolate place where the FM radio does a lot of seeking; that's all the audio I had on board because the Ram HFE is decidedly lacking in comfort and convenience features. To get to an EPA-estimated 29 mpg highway figure, Ram engineers had to goals: To strip weight and improve aerodynamics. In the wind tunnel, the medium-size 4x2 Quad Cab with 20-inch wheels and the Ram Express trim level's one-piece front bumper proved the most aerodynamic configuration of the many flavors of Ram available. Interestingly, testing revealed that adding full-length tubular side steps and a tri-fold tonneau cover normally offered in the Mopar accessories catalog aid aerodynamics.

Ram boosts Heavy Duty truck claims for 2015 [w/video]

The heavy-duty truck segment boasts some of the tightest competition of any automotive niche in the US. Being able to tout just one best-in-class figure can be a marketing advantage over competitors, and Ram Trucks is adding one more accolade to its tally with a powertrain update for the 2015 Ram 2500 and 3500 Heavy Duty pickups. Ram now claims best-in-class ratings for torque, towing and payload, depending on configuration.
The major change comes for the 3500 HD with a boost in torque for its Cummins 6.7-liter, inline-six diesel engine. It now produces a meaty 865 pound-feet of twist, a boost of 15 lb-ft, which is the best figure in its segment, according to the company. To eek out the extra power, the mill has more aggressive fuel delivery, and the turbo has been recalibrated. Of course, more grunt would be meaningless if drivers couldn't do anything with it, and the tweaks help allow payload to grow to 7,390 pounds, up from a rating of 7,320 pounds last year. The max towing rating remains unchanged at 30,000 pounds, though.
The rest of the powertrain lineup carries over from last year. The base HD mill is the gasoline-fed 5.7-liter V8 with 383 hp and 400 lb-ft and a six-speed automatic. The next step up is a 6.4-liter V8 with 410 hp and 429 lb-ft. There are also three trims of the 6.7-liter Cummins diesel starting with 350 hp and 660 lb-ft with a six-speed manual gearbox. If buyers opt for a the 68RFE six-speed auto, they get 370 hp and 800 lb-ft. Finally, there's the updated, top-rung version with 385 hp and 865 lb-ft with an Aisin six-speed automatic transmission.