13 Dodge New Lift Fuel Rims 8k Mi V8 Auto Monster 1 Owner Net Direct Auto Texas on 2040-cars

Auto blog

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

Ford, Chrysler and Mazda expand scope of Takata airbag recalls

The scope of the Takata airbag inflator recall is ballooning once again across the United States. Where Honda has elected to take its driver-side airbag campaign nationwide, Chrysler Group and Ford have now announced expanded regional actions to cover some passenger-side airbag inflators. Mazda is adding more regions, as well. For Chrysler Group, the campaign covers the inflators on 149,150 examples of the 2003-model-year Ram 1500, 2500 and 3500 pickups. The recall is limited to vehicles sold or ever registered in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, Texas and the territories of American Samoa, Guam, Puerto Rico, Saipan, and the Virgin Islands. The company will begin notifying affected customers on January 19. According to Chrysler's announcement of the action, the passenger side inflators in these trucks "are of a type that is not used in any of the other vehicles affected by Chrysler Group's regional field action." The automaker says that it's not aware of any actual failures or accidents in these pickups and even claims there are no "observed failures in laboratory testing of its airbag modules." The company is continuing to study the problem, though. Ford is taking a similar step by issuing a recall of inflators for 38,500 examples of the 2004-2005 Ranger and 2005-2006 Ford GT. The campaign only affects vehicles originally sold or ever registered in Florida, Hawaii, Puerto Rico and the US Virgin Islands. Certain zip codes of Georgia, Alabama, Mississippi, Louisiana, Texas, Guam, Saipan and American Samoa are also covered. There's already precedent for passenger-side airbags to be covered under the Takata inflator recall. When many automakers announced campaigns in June, BMW, Chrysler, Ford, Honda, Mazda, Nissan and Toyota all included that side in some of their repairs. Subaru subsequently did, as well. In addition, Mazda is expanding the scope of its recall to add Florida, Puerto Rico, Hawaii, Saipan, Guam, American Samoa, US Virgin Islands, Georgia, Alabama, Louisiana, Mississippi and Texas to the affected areas. The company estimates that it has a total of 86,773 vehicles in need of repair. Mazda is also teaming with Toyota to begin independent testing of the Takata inflators. Scroll down to read all of the automakers' announcements of these newly expanded recalls. Statement: Air-Bag Inflators December 3, 2014 , Auburn Hills, Mich.

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.