2005 Porsche Cayenne Turbo on 2040-cars

Auto blog

Porsche reportedly working on new turbocharged flat-four boxer engine?

These days, we've seen just about every automaker dropping cylinders in an effort to appease tightening fuel economy and emission standards - and Porsche is no exception. Nearly three years after introducing an all-new V6 powerplant under the front hood of its Panamera sedan (launched with a range of V8 engines) comes word that Porsche is working on an all-new turbocharged flat-four boxer to replace the flat-six engines mid-mounted in its Cayman and Boxster models.
Specifics have yet to be learned, but reports say the engine is a derivative of the current 3.8-liter six (shown above) found under the rear decklid of the Carrera S, yet with two fewer cylinders. Fitted with a turbocharger, direct-injection and the automaker's VarioCam Plus, the new all-aluminum 2.5-liter flat-four will likely develop upwards of 350 horsepower and 360 pound-feet of torque. Redline should be about 7,500 rpm. Initial indications say that Porsche will only offer the new engine with its seven-speed PDK dual-clutch automatic, tuned to take advantage of the low-end torque, but a traditional six-speed manual gearbox has not been ruled out. Despite the loss of two cylinders, enthusiasts will likely embrace the new engine as it promises to be lighter, more fuel efficient and more powerful than the 2.7-liter and 3.4-liter sixes in the Cayman/Boxster today.
Even though Porsche has been using Volkswagen Group engines for years (e.g., Cayenne V6, Cayenne Diesel and upcoming Macan), all indications are that the new flat-four will not be shared. Instead, it will be kept in-house for the automaker's sports cars and possible future fitment in an entry-level 911.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.

Xcar considers the Porsche 911 GT3's PDK

Porsche ruffled some feathers when it unveiled the latest 911 GT3 a couple of years ago with a dual-clutch transmission instead of an old-school manual. The rationale was (and remains) that the PDK makes the enthusiast's Elfen faster than it would be with a stick. The purists scoffed, but Zuffenhausen held firm – and even did the same with the even more hardcore GT3 RS. In its latest video, the boys at Xcar set out to find out if the GT3 with its fancy automated gearbox is as good as the previous model (or as good as the current model could be) with a manual – and took in some of the track toy's other trickery while they were at it. Check out the video above to find out what conclusion they reached.