1974 Porsche 914 2.0l Bursch Exhaust, Upgrade Suspension, California Car, on 2040-cars

Auto blog

Porsche 911 GT3 RS looks wicked, this way comes

Those who didn't think Porsche went extreme enough with the latest 911 GT3 likely won't be disappointed when the more focused GT3 RS arrives. And as you can see from these latest spy shots, it looks like it's speeding right around the corner. Tipped to debut at the Geneva Motor Show this coming March, the new Porsche 911 GT3 RS is shaping up to be an enthusiast's dream - and with the prospect of a GT2 in doubt, could be the most hardcore Elfen in the range. Instead of the 3.8-liter flat-six in the current GT3, the new RS will pick up where the previous limited-edition GT3 RS 4.0 left off, with four naturally aspirated liters of unadulterated boxer power channeling a good 520 horses to the rear wheels. That will be a significant increase over the existing 475-hp GT3 and will match the 911 Turbo for output (if not the 560-hp Turbo S) and without any turbo lag to slow down the action, either. Whether it will keep the GT3's dual-clutch gearbox and four-wheel steering system, or ditch one or both for a more analog approach, remains to be seen, but we're holding out hope. Either way, the modifications to the bodywork ought to make the GT3 RS stand out even further and stay glued to the race track it will call home. Notice the deep front splitter scooping up snowflakes like a shovel, a massive rear wing (which may or may not be the final production version), the Turbo-spec rear end with air intakes ahead of the rear wheels, and a set of awesome-looking gills over the front wheels – all of which you can scope out in the gallery full of spy shots above.

2020 Porsche 911 Speedster spied with an angry driver

Porsche gave us details and showed us a concept of the 911 Speedster at the Paris Motor Show. Today, we bring you spy shots of what appears to be the production version of that concept with a few changes on board. They're rather minimal modifications, but the Speedster's driver appears especially angry with our spy photographer as he extends his middle finger directly toward the camera. Sorry, not sorry, Mr. Test Driver. Public testing of pre-production cars always comes with photo risks, and Porsches tend to attract more attention than others. You'll notice what appears to be a Cayenne Coupe prototype we've previously spotted running around with the 911. The Speedster Concept we saw in Paris had epic retro mirrors and fuel cap on the front hood, but both those design touches are absent from this pre-production car. It's tougher to see, but we lost the vents in between the two humps, as well. Everything else appears to have made it to production-spec. We can't say we're surprised these concept car features probably won't show up on the production car, but it is a tad deflating. You'll notice the Speedster is based-off the 991.2 generation of 911 and not the new 992. Porsche did a similar thing when the 997 generation was coming to an end with a Speedster model paying tribute to that car's life. The chassis is said to utilize parts from the 911 GT3, and the wonderful naturally aspirated flat-six engine gets carried over from that car, too. Porsche didn't specify if power will be exactly the same as the GT3, but we'll be expecting about 500 horsepower and a 9,000 rpm redline. We were told the six-speed manual would be offered on the Speedster in Paris, too. Let's just say that we strongly approve of that combination. Production will be limited to only 1,948 cars and begin in the first half of this year. We'll expect a reveal with a full spec breakdown soon, possibly for the upcoming Geneva Motor Show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.