2008 911 C4s Cabriolet - Blk/blk/blk - 6 Spd - Nav - Bose - Park Assist - 13k Mi on 2040-cars

Auto blog

The 2017 Porsche 911 RSR goes mid-engine, purists be damned

Porsche unveiled its World Endurance Championship and IMSA WeatherTech Championship competitor with the 2017 911 RSR. And this 911 is different from the rest, as the 4.0-liter flat-six engine powering this beast is in front of the rear axle, not behind it. That's right, this 24 Hours of Le Mans competitor ditches the iconic rear-engine layout. Porsche isn't talking specifics on how exactly things are arranged back there. The engine is new, now based on the 991 911's block instead of the previous Mezger motor that's been used for years. The transmission design is new as well – it would have to be to accommodate the new location relative to the engine. The racecar has been engineered to meet the LM-GTE class, where it will go up against other mid-engine cars like the Ford GT and Ferrari 488 GTE. Moving the engine to the middle has given Porsche the ability to fit the 911 RSR with massive bits of aero, like the humongous rear diffuser that looks like it would be more at home on a machine of war. The only thing that can compete with the diffuser for size is the top-mounted rear wing, which shares a similar design to the one found on the 919 Hybrid. Going back to the engine, the direct-injected boxer motor, depending on the size of the restrictor, generates as much as 510 horsepower and sends all of its fury to the rear wheels. The engine is paired to a six-speed sequential gearbox, which drivers can employ through paddles on the steering wheel. The new engine doesn't have a lot of weight to push around as the 911 RSR, as required by regulations, weighs 2,740 pounds. Speaking of weight, the engine layout isn't the only change for the 911 RSR. For 2017, the car ditches its steel body for one that's made out of carbon fiber. The body attaches to the chassis via quick-release fasteners, making the vehicle easier to service as exterior elements can be removed with minimal effort. The racecar also gets a radar-based collision system – aptly named the "Collision Avoid System" – which is meant to limit the 911 RSR's encounters with faster LMP prototypes. Only time will tell if the new layout and aerodynamic components help the 911 RSR beat its competition. But there will be plenty of opportunities to see the racecar in action as Porsche plans to run the 911 RSR in 19 races during the 2017 season, the first of which will take place at the IMSA opener on January 28th at Daytona, where the racecar will make its track day debut.

Porsche's baby Panamera delayed until 2019 or later

If you're enticed by the idea of a Porsche sedan but find the Panamera to be too big, your hopes may have been raised by the development of the so-called Pajun. But don't get those hopes up too much, because the latest word coming in from the Old World has it that the Panamera Junior has been delayed.
The Pajun was (and theoretically still is, despite tardiness) a project to apply to the Panamera the same winning formula that Porsche used to transmute the Cayenne into the smaller Macan. Its size would be closer to the BMW 5 Series and Mercedes E-Class than the larger Panamera, and employ an array of six-cylinder engines.
The smaller five-door was set to be the cornerstone of Porsche Product Strategy 2018, a plan that included several new models to be launched within the next four years. However, reports now indicate that the Volkswagen Group is counting on Porsche to help bolster its profits and is not keen on investing in new products at this time, pushing the Pajun and other projects back until 2019 at the earliest. Although much of the strategy remains undisclosed, it is believed to include (or have included) a sub-Boxster sports car and a supercar to slot in between the 911 and the 918 Spyder. There was also talk of a shooting brake version of the Panamera based on the Sport Turismo concept pictured above. What will become of those projects, however, remains to be seen.

2014 Porsche 911 GT3 [w/video]

The Bearable Lightness Of Being
Start with a standard Porsche 911 Carrera and its 350-horsepower, 3.6-liter flat six-cylinder engine. Bore a crepe-thin slice of aluminum from each cylinder to get to 3.8 liters, add a wider track out back and two extra exhaust pipes and voila, you can append an S to the Carrera's name. Hang two sets of wet, multi-disc clutches along its spine and you can make that a 4, or a 4S. Bolt on two forced-induction compressors and piping, add two fender vents and comically wide rear tires and you've redeemed your ticket to a Turbo. Increase the boost pressure and swell the corral to 560 horses and you have the Turbo S, which is the Virginia Slims of the 911 line-up because it's come a long way, baby.
Or you can go in a different direction. At that second stop, grab the 3.8-liter and cart it over to the engineers at Porsche's development center in Weissach, Germany. If racing were meat, they would be among the alpha carnivores. The baseboards in their homes are probably painted with miniature billboards for motor oil and vintage cigarettes along the straights, red-and-white stripes around every corner.