1975 Pontiac Firebird Trans Am 455 Ho Beautifully Restored Ta Selling No Reserve on 2040-cars

Auto blog

Junkyard Gem: 1997 Pontiac Sunfire SE Convertible

For the entire 24-year production run of the GM J platform (best known for the Chevrolet Cavalier), the Pontiac Division offered new J-Body cars for sale in the United States. First there was the J2000, followed in quick succession by the 2000, 2000 Sunbird and Sunbird. The Sunbird stuck around until the Cavalier got a major redesign for the 1995 model year, at which point Pontiac changed the car's name to Sunfire. Today's Junkyard Gem is one of those early Sunfires, a top-of-the-line SE convertible with the optional big engine and manual transmission. The Sunfire was an extremely close sibling to the same-year Cavalier (by the late 1980s, all the other US-market GM divisions had dropped their J-cars, which meant no more Skyhawks, Cimarrons or Firenzas), quite difficult to distinguish from its near-twin at a glance. The base engine for the 1997 Sunfire convertible was the pushrod 2.2-liter straight-four that powered so many J-bodies of the 1990s. That engine produced just 120 gnashing, valve-floating horsepower, not much by late-1990s standards. For a mere 450 additional dollars, however, the 2.4-liter Twin Cam engine and its high-revving 150 horses could be had by '97 Sunfire buyers. That's what's in this car. This is one of the members of the Oldsmobile Quad 4 family, though some fanatics will yell at you if you apply that name to the versions that don't have big QUAD 4 lettering cast into the valve cover. This is the most powerful engine ever used in production Sunfires. For 1997, Pontiac offered a four-speed automatic transmission for no extra cost in the Sunfire convertible. Buyers of all other Sunfire models that year had to shell out either $550 or $810 ($1,026 or $1,511 in 2023 dollars) for a two-pedal rig. That means that the buyer of this car really wanted the five-speed manual transmission (or just hungered for the $810 credit offered in the fine print for takers of the manual). Plenty of free-breathing engine power, five-on-the-floor driving enjoyment and the open skies above. What a fun car! This one made it to nearly 180,000 miles. For this car with the Quad 4 under the hood and a clutch pedal on the floor, the MSRP was $18,539 (about $34,584 today). Its Cavalier LS convertible twin with the same engine/transmission setup cost $17,365 ($32,394 now). This car has a bunch of options, including the 15" Rally aluminum wheels, so the out-the-door price would have been higher. The last year for the Sunfire was 2005, same as the Cavalier.

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...