Black 5 Speed Manual Transmission Good Condition on 2040-cars

Auto blog

Porsche Syberia RS rally car is what you make when you need a Hummer that's fast

Some history: The Porsche 911's first-ever race was the 1965 Monte Carlo rally, entered because Porsche's PR man at the time wanted to show how much the future icon could do. A year later, Porsche began selling an optional rally kit for the 911 that included Recaro seats, a roll bar, and adjustable Koni dampers. Porsche produced factory rally racers until the early 1970s, winning Monte Carlo three times in a row before letting privateers carry the torch so the factory could focus on campaigning in the East Africa Safari. After years of painful lessons, when Porsche took its brand-new 1978 911 SC to the safari, the 3.0-liter flat-six coupe was hours away from winning the race before damaging the suspension, demoting the car to second place. Porsche fans wanted their own replicas, and finding the new 911 to be an affordable option, the SC — built from 1978 to 1983 — went from denoting "Super Carrera" to "Safari Car."   Porsche took a big step up in with the 953 rally car. Built to win the 1984 Paris-Dakar, which it did, the 953 introduced the four-wheel-drive system Porsche would evolve for the 959 in 1985 and the 964-series 911 in 1989, as well as the now-unforgettable 911-based Rothmans livery. All of this is what's fueling today's 911 Safari Car revival around the world. Almost all of today's builds start with the so-called G Model 911s, produced from 1973 to 1989, usually focusing on the SC and the Carrera that ran from 1984 until 1989.  Fast forward to 2007 when a mysterious crew organized the TransSyberia Rally, a "sports-touring" event that stretched 4,500 miles from Moscow to the capital of Mongolia, Ulaanbaatar. Of the 34 vehicles that entered, 25 were Porsche's purpose-built Cayenne S Transsyberia Edition.  Put this all in a pot and you have the beginnings of the car that brings us here, the Syberia RS. It's said that a German fellow by the name of Kai Burkhard wanted to buy a Humvee, but the low top speed, around 50 miles per hour, put him off. So instead, he imported a 1986 911 "in collector condition" from Japan with the idea of rebuilding it to provide almost all the off-road fun he could have had in the H1. Burkhard tapped the Tailor Made department at German suspension designer H&R, and the two set to work creating a build like the 953 Dakar winner.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The owner's been mum on most of the details including engine revisions.

2013 Hurst Edition Trans Am

No, you didn't read our title wrong. This is a 2013 model year Trans Am, and yes, that is a Pontiac logo affixed to the front of the car. But don't bother dialing up your local General Motors dealership just yet. This is the new Hurst Edition Trans Am created by the Trans Am Depot located in Tallahassee, FL. Having spent a number of years restoring early Trans Am models, the crew at Trans Am Depot finally did what many Pontiac enthusiasts wish GM would have done - create a modern Trans Am using the fifth-generation Chevrolet Camaro.
As the former owner of a 1977 model, I've been wanting to check out Trans Am Depot ever since I first saw the company have American Choppers build a trio of motorcycles inspired by its Pontiac remakes. So I jumped at the chance to head to Florida's capital city to visit the shop and drive its latest creation, the new Hurst Edition Trans Am. As a collaboration with Hurst, this car made its debut at the 2012 SEMA Show and then popped up again on our radar with a cheesy yet perfectly fitting video back in March.
Driving Notes

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado