Find or Sell Used Cars, Trucks, and SUVs in USA

Rare 1977 Pontiac Can Am Le Mans Sport Coupe Firebird Trans Am Gto Grand Prix on 2040-cars

Year:1977 Mileage:0
Location:

Grants Pass, Oregon, United States

Grants Pass, Oregon, United States
Advertising:

Rare! 1977 Pontiac Can Am project! 

This has the original numbers matching Pontiac 6.6 litre 400 (200HP)engine...although, it started to smoke and was pulled to rebuild. 

Block and heads look great and come with all the engine accessories.... also has the original turbo 400 transmission and the original limited slip rear end.

This is a solid car with minimal rust.... it does have the typical through rust on the driver and passenger quarter panels but otherwise solid everywhere else.

The windshield is cracked but all other glass is good....the rear window has been tinted at one point but is not cracked. The louvers on the quarter windows are in good condition as well. 

The firethorn red interior is in good condition for the year.

Rear spoiler has a crack and comes with the two end pieces. I also have a spare center piece but it has a crack in it as well.This part is extremely hard to find.

 The 1977 Pontiac Can Am has some neat history behind the designing and cancellation of this limited production car....the man that designed the GTO Judge put his skills to work and was the one responsible for reworking the base Le Mans into the Can Am.

This is your opportunity to own a very rare, big bodied, unique, collectible car.... truly made for performance from the mid 1970's.... reported to have less than 300 that still remain.

 

Beautiful car to restore!

*Engine has been placed back in the engine compartment and bolted down and tires that hold air have been put on the car.

The car is now ready to be shipped out!

Will help to arrange shipping if needed.

 

 The Can Am package was specific to Le Mans cars painted Cameo White which were then accessorized in striking orange, red and yellow graphics as well as blacked-out lower panels and window trim. The standard road wheel was a color-matched Rally II with chrome trim rings, as shown at right. Many options were available, including the same aluminum "snowflake" wheels offered on the Trans Am, and a steel or glass sunroof. Interior trim color options were the same as the base Le Mans, and included red, black, white and tan.

The number of Can Ams produced has never been accurately determined, but the number most commonly used is 1,377. Complete Le Mans coupes were shipped by Pontiac to Jim Wangers' Motortown business which carried out the various Can Am appearance modifications, including those relating to the hood, rear deck spoiler and body decals. According to the Can Am Registry in late 2007, 42 cars feature the Oldsmobile 403 engine, outwardly identified by "6.6 LITRE" decals on the hood shaker. The rest of the cars on the Registry have the Pontiac 400 engine, designated "T/A 6.6" on the hood shaker decals. The Pontiac Historical Service (PHS) can determine whether a car is a genuine Can Am, and list the options as it was delivered from the factory.

When the Can Am was first introduced to the dealers, Pontiac envisioned producing 2,500 units; the response from the buying public was much more than expected and over 5,000 orders were submitted. Unfortunately, the mold used to produce the fiberglass rear spoiler broke, and production at Motortown, Inc. (where the Le Mans Sport Coupes destined to become Can Ams were sent) ceased. Pontiac upper management, already worried about losing sales of their Grand Prix models (the Can Am and the Grand Prix used the same dashboard and console, so a sale of a Can Am was seen as a loss of a sale of a Grand Prix by some senior Pontiac executives), decided to scrap the project after approximately one half year of production.

Built with the Pontiac 400 engine, the Can Am came with the three speed automatic TH400 and 3.08 rear gears. When built with the Olds 403 engine, the Can Am came with the three speed automatic TH350 and 2.41 rear gears. There were no four speed manual transmission Can Ams produced. 


Auto Services in Oregon

Zeigler`s Trans & Auto Repair ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 1911 SW Court Ave, Pilot-Rock
Phone: (541) 276-8024

Washington Glass Of Goldendale ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Automobile Accessories
Address: 740 E Broadway St, Rufus
Phone: (509) 773-5500

Tualatin Transmission Center ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Clutches
Address: Zigzag
Phone: (503) 691-1555

Tualatin Tire Factory ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 8750 SW Old Tualatin-Sherwood Rd, Beavercreek
Phone: (503) 692-9333

Trinity Glass ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Home Repair & Maintenance
Address: Idanha
Phone: (503) 267-9596

Tom Dwyer Automotive Svc ★★★★★

Auto Repair & Service, Brake Repair, Auto Transmission
Address: 530 SE Tenino St, Boring
Phone: (503) 230-2300

Auto blog

Junkyard Gem: 2010 Pontiac Vibe

Wed, Apr 17 2024

Just over a month before filing for Chapter 11 bankruptcy in June 2009, General Motors announced that the 83-year-old Pontiac Division would be "phased out" by the end of 2010. Only three Pontiac vehicles were sold as 2010 models in the United States: the Solstice, Vibe and G6 (new G3s were sold here during 2010 but they were all 2009 models, while the G5 was available as a 2010 model only in Canada and Mexico). Today's bit of junkyard automotive history is one of the very last Vibes ever built, found in a yard near Denver, Colorado. This car is significant not just as one of the final vehicles to bear Pontiac badges but also as one of the last cars built by the New United Motor Manufacturing Incorporated GM-Toyota joint venture in California, better known as NUMMI. The NUMMI factory began life as GM's Fremont Assembly, which built its first vehicle (a C-Series pickup) in 1963 and closed in 1982 after building its final vehicle (an Oldsmobile Cutlass Ciera). Rebooted as NUMMI, the first 1985 Chevrolet Nova (an Americanized AE82 Toyota Corolla Sprinter) rolled off the line in December of 1984. A quarter-century and better than eight million vehicles hence, NUMMI shut down production after its last Corolla was finished on April 1, 2010. While there was some noise about the Oakland Athletics building a new stadium on the site at the time, Tesla ended up buying most of the site soon after that. Tesla now builds more vehicles per year there than NUMMI ever did. The Vibe was co-developed with Toyota and based on the same platform as the ninth-generation Corolla. The Toyota Matrix was mechanically identical and was built in Canada, while the Japanese-market version (known as the Toyota Voltz) was built on the same NUMMI line as the Vibe and shipped across the Pacific. The Vibe/Matrix/Voltz got a redesign for the 2009 model year, but few noticed due to all the turmoil in the GM world at the time. The final Vibe was built in August 2009. This car was built in July of 2009, just before the end. It was living in West Texas just prior to coming to Colorado. El Paso is about a ten-hour drive from this car's current location. Once in the Centennial State, it got parked somewhere it shouldn't have been and ended up being auctioned to Pick Your Part. An occupant of this Vibe had time to sample some of the local agricultural products before that happened.

This KITT replica sold at auction for $32,500

Thu, Apr 23 2020

UPDATE: This 1987 Pontiac Firebird Trans Am KITT replica officially sold for $32,500. Here's hoping the new owner has a blast throwin' it into Pursuit Mode. Let's get one thing straight right off the bat: This isn't a perfect KITT replica. The original KITT used in the Knight Rider TV series was based on a 1982 Pontiac Firebird Trans Am. The one you see above, which is currently for sale at auction site Bring A Trailer, is a 1987 model, and since it's a GTA edition, it has some extra body cladding that the smooth-sided television car lacked. That aside, most casual observers would probably never notice the difference, and even those who did (like us) are still likely to be impressed by the car's transformation. This KITT replica is powered by a 5.0-liter V8 engine mated to a four-speed automatic transmission. It ought to be fairly quick, though quite a bit shy of the fictional car's very fictional 300-mph top speed. We're not exactly Knight Rider experts, but some quick Google sleuthing suggests that the Knight Industries Two Thousand supposedly cost more than $11,000,000 to build in Hollywoodland. This one will surely command a significantly lower sum — as of this writing, it's been bid up to $18,000 with four days remaining on the auction. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. For those truly fanatical about accuracy, here's a video of one of the originals visiting Jay Leno's Garage for reference. There are several videos of the car that detail its modifications inside and out, but suffice it to say it seems to be a well-sorted replica. Here's hoping its new owner keeps it well clear of other KARRs. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

This massive 'Knight Rider' KITT model costs over $1,400

Tue, May 18 2021

A new model of the famed Pontiac Firebird from the 1980s TV show Knight Rider is here, and it's massive. The shadowy flight into the dangerous world of this subscription-based kit by DeAgostini will result in a car that measures nearly two feet long, cost more than $1,400, and take you over two years to complete. For years, subscription-based model kits have been a tradition for hobbyists in Europe and Asia. Should you sign on, each week you'll receive a package in the mail that includes a few parts for the model and some literature on the subject. Usually there are additional collectibles and accessories, like a display case. The DeAgostini KITT kit, for example, begins with the hood for the first issue. The asymmetric bulged and scooped body panel comes with a several smaller body pieces and a small screwdriver. Issue two comes with the front fascia, KITT's red scanner light, and three of the six driving lights. Issue three gives you a tire, wheel and brake components for one of the four corners. And so it goes. When all is said and done, you'll receive 110 such packages over a span of so many weeks. In other words it'll take two years and one-and-a-half months to complete the black, 1:8 scale Pontiac. There are some discounted prices for the first few issues to get you hooked, but once you get settled in the regular price for each issue is ˆ10.99 ($13.36 USD). Here's a preview the 16-page pamphlet that accompanies the first issue. By the end, you should have a pretty comprehensive compendium of the Knight Rider series as well. The issues are available on newsstands, but subscribers get additional gifts — two 1:43 scale models, one of KITT and one of his nemesis KARR. And for an additional ˆ1.00 per issue, you'll receive an acrylic display case. As for the Knight Industries Two Thousand itself, the car appears to be incredibly detailed. As depicted on the DeAgostini website, the hood, doors, trunk and T-top roof panels all open. The red scanner lights up, the rear license plate rotates for three options, and there even seems to be a watch that commands the model to speak some of KITT's catch phrases. Knight Rider — or Supercar as it was called in Italy — told the episodic story of a former police officer, Michael Knight, who fought crime with his A.I.-powered car. As such, the TV car and the the model have a heavily computerized (by 1980s standards) dashboard and yoke steering wheel.