1967 Pontiac Lemans Convertible Driveable Project Car Read Description Gto Clone on 2040-cars
Willow Grove, Pennsylvania, United States
Pontiac Le Mans for Sale
Auto Services in Pennsylvania
Witmer`s Auto Salvage ★★★★★
West End Sales & Service ★★★★★
Walter`s Auto Wrecking ★★★★★
Tony`s Towing ★★★★★
T S E`s Vehicle Acces Inc ★★★★★
Supreme Auto Body Works, Inc ★★★★★
Auto blog
Junkyard Gem: 1988 Pontiac 6000 LE Safari Wagon
Wed, May 27 2020The Detroit station wagon was fast losing sales to minivans and trucks as the decade of the 1980s progressed, but Pontiac shoppers still had plenty of choices as late as the 1988 model year. A visit to a Pontiac dealership in 1988 would have presented you with three sizes of wagon, from the little Sunbird through the midsize 6000 and up to the mighty Parisienne-based Safari. Today's Junkyard Gem is a luxed-up 6000 LE, complete with "wood" paneling, found in a car graveyard in Fargo, North Dakota. Confusingly, the "Safari" name in 1988 was used by Pontiac to designate both a specific model — the wagon version of the Parisienne/Bonneville— and as the traditional Pontiac designation for a station wagon. That meant that the wagon we're looking at now was a Safari but not the Safari in the 1988 Pontiac universe. The 6000 lived on the GM A-Body platform, as the Pontiac-badged version of the Chevrolet Celebrity. Production ran from the 1982 through 1991 model years, with the A-Body Buick Century surviving all the way through 1996. The LE trim level came between the base 6000 and the gloriously complex 6000 STE (which wasn't available in wagon form, sadly). I visited this yard in Fargo after judging at the Minneapolis 500 24 Hours of Lemons in Brainerd, Minnesota, last fall. Up to that point, I had visited 47 of the Lower 48 United States, with just North Dakota remaining, so I made a point of doing a Fargo detour in order to check that state off my list. I'm pleased that I found such a good example of the 1982-1996 GM A-Body in this yard, because the most famous of all the A-Bodies is the 1987 Oldsmobile Cutlass Ciera driven to Brainerd by the inept Fargo-based kidnappers in the film "Fargo." This Minnesota-plated 6000 had some rust, but just negligible levels by Upper Midwestern standards on a 31-year-old car. The interior looked very good, with the original owner's manual still inside. The 6000 LE boasted "redesigned contoured seats and London/Empress fabric," which sounds pretty swanky. Something less swanky lives under the hood: an Iron Duke 2.5-liter pushrod four-cylinder engine, known as the Tech 4 by 1988. The Iron Duke was, at heart, one cylinder bank of the not-quite-renowned Pontiac 301-cubic-inch V8; while fairly rugged, the Duke ran rough (typical of large-displacement straight-four engines) and made just 98 horsepower in this application. Pontiac offered a couple of optional V6s in the 6000 in 1988, but no Quad 4.
What car brand should come back?
Fri, Apr 7 2017Congratulations, wishful thinker! You've been granted one wish by the automotive genie or wizard or leprechaun or whoever has been gifted with that magical ability. You get to pick one expired, retired or fired automotive brand and resurrect it from its heavenly peace! But which one? That's a tough decision and not one to be made lightly. As we know from car history, the landscape is littered with failed brands that just didn't have what it took to cut it in the dog-eat-dog world of vehicle design, engineering and marketing. So many to choose from! Because I am not a car historian, I'll leave it to a real expert to present a complete list of history's automotive misses from which you can choose, if you're a stickler about that sort of thing. And since I'm most familiar with post-World War II cars and brands, that's what I'm going to stick to (although Maxwell, Cord and some others could make strong arguments). So, with the parameters established, let's get started, shall we? Hudson: I admit, I really don't know a lot about Hudson, except that stock car drivers apparently did pretty well with them back in the day, and Paul Newman played one in the first Cars movie. But really, isn't that enough to warrant consideration? Frankly, I think the Paul Newman connection is reason enough. What other actor who drove race cars was cooler? James Dean? Steve McQueen? James Garner? Paul Walker? But, I digress. That's a story for another day. Plymouth: As the scion of a Dodge family (my grandfather had a Dodge truck, and my mom had not one, but two Dodge Darts – the rear-wheel-drive ones with slant sixes in them, not the other one they don't make any more), I tend to think of Plymouth as the "poor man's Dodge." But then you have to consider the many Hemi-powered muscle cars sold under the Plymouth brand, such as the Road Runner, the GTX, the Barracuda, and so on. Was there a more affordable muscle car than Plymouth? When you place it in the context of "affordable muscle," Plymouth makes a pretty strong argument for reanimation. Oldsmobile: When I was a teenager, all the cool kids had Oldsmobile Cutlasses, the downsized ones that came out in 1978. At one point, the Olds Cutlass was the hottest selling car in the land, if you can believe that. Then everybody started buying Honda Civics and Accords and Toyota Corollas and Camrys, and you know the rest. But going back farther, there's the 442 – perhaps Olds' finest hour when it came to muscle cars.
Vitruvian Energy crowdfunding to make EEB, a trashy biofuel
Sat, Nov 22 2014When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.