2006 Pontiac Gto Twin Turbo 608rwhp 579rwtq Metallic Silver Low Miles Clean on 2040-cars

Auto blog

Lutz says GM was working on 5th-gen Pontiac GTO

Bob Lutz was one of the forces behind bringing the Holden Monaro to the United States, as the ill-fated Pontiac GTO in 2004. And while that car received critical acclaim, it was a sales disappointment. Now, Road & Track is reporting that our suspicions were correct - Pontiac was working on a two-door, G8-based coupe before it was shuttered.
In that R&T article, which is no longer available online, Lutz explained that the new GTO would solve many of the issues found in the original. Car Advice speculates that the new model would have look like a rebadged version of the Holden Coupe 60 Concept from 2008, a conclusion we also came to.
That car would have been a big departure from the 2004 to 2006 GTO. It has an extremely long hood and short rear deck, with an almost fastback roofline and a wide greenhouse with a tall beltline. The wheel arches were very pronounced, and the chin and rocker panel splitters gave it a race-ready look. Would it have been enough to make the GTO work in the US? We think it might of, but it looks like we'll never know.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

GM Recalls 1.5 Million Cars For Steering Defect

General Motors Co. said Monday it is recalling 1.5 million vehicles worldwide because the electronic power-steering assist can suddenly stop working, making them harder to steer. The new recall brings to 6.3 million the number of vehicles GM has recalled since February. The initial recall - now at 2.6 million small cars for an ignition switch defect - prompted the automaker to name a new safety chief and speed up the review of cases that might lead to recalls. GM said it expects recall-related costs to total $750 million in the first quarter, including $300 million for the ignition switch recall. Included in the new recall are: - Chevrolet Malibu from the 2004-2005 model years, plus some 2006, 2008 and 2009 model-year cars. - Chevrolet Malibu Maxx from the 2004-2005 model years, plus some 2006 model-year cars. - Chevrolet HHR from the 2009-2010 model years (non-turbocharged only). - Some Chevrolet Cobalts from the 2010 model year. - Some Saturn Auras from the 2008-2009 model years. - Saturn Ion from the 2004-2007 model years. - Pontiac G6 from the 2005 model year, plus some cars from the 2006, 2008 and 2009 model years. - Service parts installed into certain vehicles before May 31, 2010, under a previous recall GM says no deaths related to the defect have been reported. It is still investigating whether there have been any accidents or injuries related to the problem. GM dealers will replace the power steering motor and other parts for free. Spokesman Alan Adler said owners will be notified of the recall the week of April 28 and will be told when parts are available after that. The Cobalt and the Ion, which are also involved in the ignition switch recall, share many common parts.GM recalled Cobalts from the 2005-2010 model years for the power steering defect in 2010, but it's unclear why the company didn't recall the Ion at the same time. Federal regulators also opened an investigation into power steering complaints in the Ion in 2010, but didn't order a recall. Related Gallery 2014 Chevrolet Corvette Stingray Test Drive View 9 Photos Recalls GM Pontiac Chevy Cobalt saturn ion pontiac g6 Chevrolet Cobalt Chevrolet HHR