2004 Used 5.7l V8 16v Automatic Rear-wheel Drive With Limited-slip Differential on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

2020 Porsche 911 Speedster spied with an angry driver

Porsche gave us details and showed us a concept of the 911 Speedster at the Paris Motor Show. Today, we bring you spy shots of what appears to be the production version of that concept with a few changes on board. They're rather minimal modifications, but the Speedster's driver appears especially angry with our spy photographer as he extends his middle finger directly toward the camera. Sorry, not sorry, Mr. Test Driver. Public testing of pre-production cars always comes with photo risks, and Porsches tend to attract more attention than others. You'll notice what appears to be a Cayenne Coupe prototype we've previously spotted running around with the 911. The Speedster Concept we saw in Paris had epic retro mirrors and fuel cap on the front hood, but both those design touches are absent from this pre-production car. It's tougher to see, but we lost the vents in between the two humps, as well. Everything else appears to have made it to production-spec. We can't say we're surprised these concept car features probably won't show up on the production car, but it is a tad deflating. You'll notice the Speedster is based-off the 991.2 generation of 911 and not the new 992. Porsche did a similar thing when the 997 generation was coming to an end with a Speedster model paying tribute to that car's life. The chassis is said to utilize parts from the 911 GT3, and the wonderful naturally aspirated flat-six engine gets carried over from that car, too. Porsche didn't specify if power will be exactly the same as the GT3, but we'll be expecting about 500 horsepower and a 9,000 rpm redline. We were told the six-speed manual would be offered on the Speedster in Paris, too. Let's just say that we strongly approve of that combination. Production will be limited to only 1,948 cars and begin in the first half of this year. We'll expect a reveal with a full spec breakdown soon, possibly for the upcoming Geneva Motor Show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

1970 Firebird Trans-Am with front-mid-engine to be immortalized as a Hot Wheels car

Each year, the Hot Wheels Legends Tour scours the country to find the coolest real-life cars and chooses one to be made into a $1 diecast toy. Earlier this month, the search came to an end when Riley Stair's heavily modified 1970 Pontiac Firebird Trans-Am won the honors. In a normal year, the Hot Wheels Legends Tour would visit multiple cities, holding a car show where judges would select one winner for that stop. At SEMA, each city's winner would then compete for the top spot. However, due to the coronavirus pandemic, this year the contest was held virtually and globally. And since SEMA was canceled too, the finale was held on the "Jay Leno's Garage" YouTube channel with Leno, Snoop Dogg, Gabriel Iglesias, and Hot Wheels designers as judges. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. What set the Firebird apart was, for starters, its front-mid-engine layout. Its LSX V8 was pushed so far back into the firewall that one bank of exhaust headers had to flow forward before curving around the front of the engine to a side-dump. Of course, all of this was custom fabricated, like the roll cage and front tube frame, with professional-grade welds. The body was also heavily modified, flared and channeled to give it a mean stance. But it's the custom Ohlins suspension with independent rear that give it its track-ready look. Perhaps most impressively, this car, which could go toe-to-toe against (and frankly exceed many) six-figure pro builds at SEMA, was built in the side yard of Stair's parents' house. Aside from body and paint, this was a shadetree job. Stair says it took a couple of years, devoting nearly every night and weekend to transforming a rusty and dented Firebird into his dream machine. Other finalists included a Street Freak-style 1969 Corvette from Florida, cartoony 1959 Chevy Ute nicknamed the "Hulk-amino", Rocket Bunny-style Cayman, 1,000-horsepower Chevy Apache, V8-powered Mini Cooper, stanced Fiat 126 from Germany, chopped VW Brasilia from Mexico, and a race-ready 1976 Hillman Imp from the U.K. Cars were judged on creativity, authenticity, and built-not-bought spirit. Look for the Trans-Am to appear in the 2021 Hot Wheels lineup. Related Video:   Featured Gallery Hot Wheels Legends Tour 2020 View 16 Photos Toys/Games Pontiac Coupe Performance Classics