2004 Pontiac on 2040-cars

Auto blog

Junkyard Gem: 1989 Pontiac Sunbird SE Coupe

General Motors built the fantastically successful J-Body cars starting at the dawn of the 1980s and continuing well into our current century, on five continents. The Pontiac Division's version of the J started out being called the J2000 and the 2000, then got the Sunbird name originally used on the Pontiac-ized Chevy Monza starting in 1983. Here's a once-slick-looking 1989 Sunbird SE Coupe, found at a Minneapolis-area boneyard way back in 2016. The best-known of all the J-Body cars, here, was the Chevrolet Cavalier, but Pontiac far outdid even the most blinged-up Cavalier Z24 when it came to elaborate taillights. Because this is Minnesota, the car is a patchwork of various layers of junkyard-obtained rusty body parts. One fender has TURBO badges from a Sunbird GT. The other side has the correct engine badges for this model. That engine is a 2.0-liter, single-overhead-cam straight-four from an engine family originally developed for the Opel Kadett D. This one was rated at 96 horsepower when new. This one has the automatic transmission, so it wouldn't have been very much fun to drive. Check out that cool parking brake handle, though! And, hey, is that a full can of Colorado Cool-Aid in the foot well? You'd think a proper Minnesota Pontiac would at least be full of Grain Belt cans. It appears that Higley Ford in Windom, Minn., had this car on the lot at some point. Windom is closer to Sioux Falls than to Minneapolis. This final mileage total looks good for a car living in Tinworm Country. Pontiac built this generation of Sunbird from the 1988 through 1994 model years, though it was really just a facelift of the first-generation cars. Starting in 1995, the Pontiac J-Body became the Sunfire, and production continued until the J platform itself got the axe in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the 90s, fun will become the exclusive province of the rich. To which the Sunbird driver replies, "Bullish!" Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Remember when Pontiac made a Trans Am Kammback grocery getter?

Despite muscle cars having strong reputations as some of the most impractical cars one can buy, they've occasionally had one of the most useful and practical features a car can sport: a hatchback. In the 1980s, General Motors' Chevrolet Camaro and Pontiac Firebird had one, and it added respectable utility to the sports cars. But the people at GM thought they could make the F-Body cars even more useful. So, after a few clay-model experiments, Pontiac built three examples of an extended-roof 1985 Pontiac Trans Am Kammback concept. Spotted by GM Authority, one of these Trans Am Kammbacks (although "shooting brake" seems like the more apt descriptor) is going on the block at the Mecum Kissimmee auction in early January 2019. Reportedly only three of these prototypes/experiments/test mules were built to driveable specs, and this example, VIN No. EX4796, has additional history that might make it the ultimate example. According to Mecum, the show car, which has made appearances at numerous auto shows, also spent some time at the race track — just not as a participant. It was used as a pace car for PPG and IMSA racing and temporarily had a light bar and "two-way communications equipment." Following its pace duty, and after GM stopped the project from going any further, it was put into Pontiac Engineering's private collection for 13 years. Famous Michigan car collector and Pontiac dealership owner John McMullen then bought the car. He eventually sent it to Pontiac specialist Scott Tiemann for a full restoration to the gorgeous condition it is in today. As seen in the photos, the Trans Am features white paint over a gray leather interior. It houses a 5.0-liter V8 under the hood and has a five-speed manual transmission. The wild concept is rare enough to be super cool, but we can't help but think of an infinitely more practical, more modern, more powerful, and arguably more interesting car we'd rather have. Manual Cadillac CTS-V Sport Wagon in Black Diamond anybody? Or, if you don't care about the extra doors, perhaps the Callaway's Corvette AeroWagen is more applicable. Either way, we're in full support of any shooting brakes we can find. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.