1970 Pontiac Gto Convertible, Automatic, 400ci. on 2040-cars

Auto blog

Junkyard Gem: 2004 Pontiac Vibe GT

The New United Motor Manufacturing plant in Fremont, California, built Toyota-derived machinery — badged as Toyotas, Chevrolets, Geos, and Pontiacs— from 1984 through 2010, and some of the very last vehicles that left the assembly line were Pontiac Vibes. The Vibe, sibling to the Toyota Matrix, mostly served as a ho-hum transportation appliance and/or fleet car, but a factory-hot-rod GT version could be purchased. Today's Junkyard Gem is one of those rare GTs, complete with the nearly unheard-of six-speed manual transmission, found in a self-service yard in northeastern Colorado. The regular Vibe had 123 or 130 horsepower, depending on the number of driven wheels, but the Vibe GT got the same 1.8-liter 2ZZ engine that went into the Celica GT-S. 180 horsepower, which was enough to make the 2,800-pound Vibe GT keep up with the 3,108-pound/215-horse Chrysler PT Cruiser Turbo that year. Sadly, no race series pitting Vibe GTs against PT Cruiser Turbos and Chevy HHR SSs on road courses ever materializedÂ… but it's not too late. The Vibe GT has something you couldn't get in a PT Cruiser or Chevy HHR, though: a six-speed manual transmission as standard equipment. In fact, the six-speed was the only transmission offered in the early Vibe GTs (an automatic became an option later on). You'll find plenty of three-pedal econoboxes from this era, because they were significantly cheaper than their slushbox-equipped counterparts, but the Vibe GT had plenty of competition from sportier-looking cars with manual transmissions in 2004. Not many were sold. This car is covered with nasty dents from golf-ball-sized hail (all too common in High Plains Colorado), so it may have been an insurance total that nobody wanted at auction. Sold in Wyoming, will be crushed in an adjacent state. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Fuel for the soul. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The kids, they were crazy about the Vibe (well, maybe not). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Toyota had right-hand-drive Matrixes brought over to Japan from Canada, but a NUMMI-built version of the Vibe could be purchased there for a few years as well. This was the Voltz, and its advertising seems notably frantic even by the standards of Japanese car commercials.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...