1969 Pontiac Gto Convertible on 2040-cars

Auto blog

Junkyard Gem: 2003 Pontiac Grand Am GT 30th Anniversary Edition

With the era of the 1960s-style muscle car ended by the ever-more-stringent emissions regulations, insurance costs and higher gasoline prices of the early 1970s, GM's Pontiac Division was ready with a lineup of flash-enhanced machines packed with (alleged) European-style performance and styling. Three of them were based on the midsize A Platform for 1973: the LeMans, the Grand Prix and the brand-new Grand Am. The 1973 Grand Am was cheaper than the luxed-up Grand Prix, but still had a BMW-ish interior and wild exterior styling; sales weren't great, but the 30th anniversary of this car seemed sufficiently momentous for Pontiac to create a special-edition package for its soon-to-be-axed successor. Here's one of these rare machines, spotted recently in a Denver car graveyard. The original rear-wheel-drive Grand Am was built for the 1973-1975 and 1978-1980 model years, but its similarity to the much cheaper LeMans kept sales numbers unimpressive. When the Grand Am name was revived for a Pontiac-badged compact on the front-drive N Platform in the 1985 model year, however, it became a big seller right away and stayed that way into our current century. The N-Body Grand Am was built through 2005, with platform updates for the 1992 and 1999 model years. Along the way, it was sibling to such cars as the Oldsmobile Calais, Buick Somerset, Chevrolet Beretta and Oldsmobile Alero. By 2003, though, the ground was shifting under Pontiac's feet. The iconic Firebird had been discontinued the previous year, and even the Grand Prix's days were officially numbered. Oldsmobile would be gone after 2004, and the entire Pontiac vehicle lineup would be shaken up soon after. The last year for the Grand Am (and the Sunfire) would be 2005, with the G6 taking its place. With all that going on, why not offer a 30th Anniversary package? After all, the Grand Prix got a 40th Anniversary Edition for 2002. Our reviewer described this car as "leaner, trimmer and more contemporary" at the time, but made no mention of the 30th Anniversary Edition. The VIN says this car is a top-grade GT1 sedan, with an MSRP of $22,325 (that's about $39,920 in 2023 dollars). Two engines were available in the 2003 Grand Am: a 2.2-liter Ecotec four-cylinder with 140 horsepower and a 3.4-liter pushrod V6 with either 170 or 175 horsepower. This car has the 175-horse V6, complete with "Ram Air" cold-air induction. That name goes way back in Pontiac history.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

2013 Hurst Edition Trans Am

No, you didn't read our title wrong. This is a 2013 model year Trans Am, and yes, that is a Pontiac logo affixed to the front of the car. But don't bother dialing up your local General Motors dealership just yet. This is the new Hurst Edition Trans Am created by the Trans Am Depot located in Tallahassee, FL. Having spent a number of years restoring early Trans Am models, the crew at Trans Am Depot finally did what many Pontiac enthusiasts wish GM would have done - create a modern Trans Am using the fifth-generation Chevrolet Camaro.
As the former owner of a 1977 model, I've been wanting to check out Trans Am Depot ever since I first saw the company have American Choppers build a trio of motorcycles inspired by its Pontiac remakes. So I jumped at the chance to head to Florida's capital city to visit the shop and drive its latest creation, the new Hurst Edition Trans Am. As a collaboration with Hurst, this car made its debut at the 2012 SEMA Show and then popped up again on our radar with a cheesy yet perfectly fitting video back in March.
Driving Notes