1968 Pontiac Convertable Ratrod Streetrod Classic Project,survivor Gm Oldschool on 2040-cars

Auto blog

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Porsche Sports Car Together Fest is a labor of many Porsche loves

Over Labor Day Weekend, Porsche held its second annual Sports Car Together Fest (SCTF) at the Indianapolis Motor Speedway. We happened to be nearby, so we swung by to check out an event we’d never heard of until a few weeks before. Reading about it on Porsche's U.S. web site made us think it would be something like Rennsport Reunion for the Midwest. Turns out SCTF is just as much of a different kind of fun. The fest Tom MooreÂ’s the man behind Dark Horse Motorsports, the motorsport consultant for Porsche Cars North America (PCNA) PR. "People love Rennsport Reunion, but thatÂ’s every three to four years," he explained. “We wanted to gather people on those off years, and we didn't want to just do a mini Rennsport, because thatÂ’s its own thing. WeÂ’ve maintained the motorsport history at Rennsport. Here [at SCTF], we're doing the current look at what Porsche racing is for." In this case, that means gathering what Moore called "our Porsche motorsport pyramid." ThatÂ’s the range of enthusiast drivers from novice to hotshoes trying to get to top-tier endurance racing, "[starting] with the progression from Porsche Club of America track days up to the top of the ladder of one-make racing in North America," the Carrera Cup North America, a series made up of nothing but the latest 500-horsepower 911 GT3 Cup cars.  The three days of racing action allowed almost any kind of Porsche owner interested in clipping apexes to compete around an Indianapolis Motor Speedway layout tweaked with an infield section. This year, that included ex-NASCAR star Jeff Gordon, coming out of retirement to reunite with his longtime NASCAR crew chief Ray Evernham for the top-class Cup races.  Evernham told us Gordon hasnÂ’t raced in five years and he hasnÂ’t been a crew chief in 22. On very short practice, Gordon finished in 14th in the Pro Class in the first Carrera Cup race of the weekend driving the #24 Hendrick Performance Group Porsche, and 11th in the second race. Afterward, he said, "I made a pass on the white flag lap. That made my whole weekend Â… I must say that yesterday, I thought ‘man, I am getting beat out hereÂ’ and I donÂ’t like that. If I am going to be in an environment like this, I want to be competitive. But today turned the corner for me. So, I hope I get to do another one day."  When we strolled the paddock after the event, exposed sheet metal proved "Rubbing is racing" is a thing in the Carrera Cup as well as NASCAR.