1966 Pontiac Gto 242 Car Black 400 Auto Buckets Power Disc Pwr Str Console Nice on 2040-cars

Auto blog

Junkyard Gem: 1992 Pontiac Firebird

Last spring, this series featured a 1992 Chevrolet Camaro RS in a Northern California junkyard, an example of the final model year for the highly successful third-generation GM F-Body. On a later visit to that yard, I spotted the Pontiac sibling to that car, a Firebird that was born the same year at the same Southern California factory. When the Chevrolet Division introduced the first Camaro as a 1967 model, the Pontiac Division got its own version of the F-Body called the Firebird. While the two cars were built on the same chassis and looked very similar, the first-generation Camaros got Chevrolet engines while their Firebird colleagues got Pontiac engines (including the innovative SOHC straight-six). The 1970-1981 second-generation Firebirds still had some Pontiac-only engines, but Chevrolet and Oldsmobile power crept under some hoods during that period. The third-generation Firebirds first appeared as 1982 models, and they drew from near-identical stockpiles of GM running gear (including the distinctly agricultural Iron Duke four-banger, which could be considered a Pontiac-derived engine). When the Camaro got the axe after 2002, the Firebird's neck was put on the same chopping block. When the Camaro returned for 2010, the Pontiac brand was sputtering to an agonized halt during its final year and there was no chance of the Firebird's return. This car is a fairly ordinary coupe, though it does have the mid-grade 205-horsepower 5.0-liter Chevrolet small-block V8 instead of the base 140-horse 3.1-liter V6. A 5.7-liter small-block was available as well. A five-speed manual transmission was base equipment, but few Americans wanted a three-pedal setup by the early 1990s. This car has the optional four-speed automatic. The MSRP with 5.0 engine, automatic transmission and air conditioning (which this car has) started at $14,304. That's about $31,868 in 2023 dollars. It was built at Van Nuys Assembly in the San Fernando Valley of Los Angeles County. By the dawn of the 1990s, the Camaros and Firebirds made at Van Nuys Assembly had become known as the worst-built GM cars made in North America, and the plant was shut down forever soon after this car was built. Today, a shopping mall lives where the factory once stood. This car managed to drive more than 150,000 miles during its life, so it beat the odds. The thrid-gen F-Body was pretty antiquated by the early 1990s, but the fourth-gen cars handled better and looked up-to-date for the era.

This Hoonigan mechanic's twin-turbo Trans Am is wonderful

What do you drive when you work on rally machines for a living? Probably a Subaru WRX, and that's what Gregg Hamilton had for a while until working on his car felt too much like his day job. So when he moved from New Zealand to the US to work for Ken Block (with a few stops along the way) he bought something entirely different. This is Gregg's 1979 Pontiac Firebird Trans Am. It's a throwback to another time, but it's anything but stock. It has that magic combination of a big V8 with a manual transmission and rear drive, just like the tin-top racers Gregg watched in his Kiwi youth. He bought it sight unseen from its previous owner in Alabama, and has been tinkering with it ever since. There's something about the flared wheel arches and the classic Firebird gold-striped black livery that has us smitten. Scope out the six-minute clip above from Petrolicious and see if you don't fall for Gregg's Pontiac as well.

This massive 'Knight Rider' KITT model costs over $1,400

A new model of the famed Pontiac Firebird from the 1980s TV show Knight Rider is here, and it's massive. The shadowy flight into the dangerous world of this subscription-based kit by DeAgostini will result in a car that measures nearly two feet long, cost more than $1,400, and take you over two years to complete. For years, subscription-based model kits have been a tradition for hobbyists in Europe and Asia. Should you sign on, each week you'll receive a package in the mail that includes a few parts for the model and some literature on the subject. Usually there are additional collectibles and accessories, like a display case. The DeAgostini KITT kit, for example, begins with the hood for the first issue. The asymmetric bulged and scooped body panel comes with a several smaller body pieces and a small screwdriver. Issue two comes with the front fascia, KITT's red scanner light, and three of the six driving lights. Issue three gives you a tire, wheel and brake components for one of the four corners. And so it goes. When all is said and done, you'll receive 110 such packages over a span of so many weeks. In other words it'll take two years and one-and-a-half months to complete the black, 1:8 scale Pontiac. There are some discounted prices for the first few issues to get you hooked, but once you get settled in the regular price for each issue is ˆ10.99 ($13.36 USD). Here's a preview the 16-page pamphlet that accompanies the first issue. By the end, you should have a pretty comprehensive compendium of the Knight Rider series as well. The issues are available on newsstands, but subscribers get additional gifts — two 1:43 scale models, one of KITT and one of his nemesis KARR. And for an additional ˆ1.00 per issue, you'll receive an acrylic display case. As for the Knight Industries Two Thousand itself, the car appears to be incredibly detailed. As depicted on the DeAgostini website, the hood, doors, trunk and T-top roof panels all open. The red scanner lights up, the rear license plate rotates for three options, and there even seems to be a watch that commands the model to speak some of KITT's catch phrases. Knight Rider — or Supercar as it was called in Italy — told the episodic story of a former police officer, Michael Knight, who fought crime with his A.I.-powered car. As such, the TV car and the the model have a heavily computerized (by 1980s standards) dashboard and yoke steering wheel.