1965 Pontiac Gto on 2040-cars

Auto blog

GM Recalls 1.5 Million Cars For Steering Defect

General Motors Co. said Monday it is recalling 1.5 million vehicles worldwide because the electronic power-steering assist can suddenly stop working, making them harder to steer. The new recall brings to 6.3 million the number of vehicles GM has recalled since February. The initial recall - now at 2.6 million small cars for an ignition switch defect - prompted the automaker to name a new safety chief and speed up the review of cases that might lead to recalls. GM said it expects recall-related costs to total $750 million in the first quarter, including $300 million for the ignition switch recall. Included in the new recall are: - Chevrolet Malibu from the 2004-2005 model years, plus some 2006, 2008 and 2009 model-year cars. - Chevrolet Malibu Maxx from the 2004-2005 model years, plus some 2006 model-year cars. - Chevrolet HHR from the 2009-2010 model years (non-turbocharged only). - Some Chevrolet Cobalts from the 2010 model year. - Some Saturn Auras from the 2008-2009 model years. - Saturn Ion from the 2004-2007 model years. - Pontiac G6 from the 2005 model year, plus some cars from the 2006, 2008 and 2009 model years. - Service parts installed into certain vehicles before May 31, 2010, under a previous recall GM says no deaths related to the defect have been reported. It is still investigating whether there have been any accidents or injuries related to the problem. GM dealers will replace the power steering motor and other parts for free. Spokesman Alan Adler said owners will be notified of the recall the week of April 28 and will be told when parts are available after that. The Cobalt and the Ion, which are also involved in the ignition switch recall, share many common parts.GM recalled Cobalts from the 2005-2010 model years for the power steering defect in 2010, but it's unclear why the company didn't recall the Ion at the same time. Federal regulators also opened an investigation into power steering complaints in the Ion in 2010, but didn't order a recall. Related Gallery 2014 Chevrolet Corvette Stingray Test Drive View 9 Photos Recalls GM Pontiac Chevy Cobalt saturn ion pontiac g6 Chevrolet Cobalt Chevrolet HHR

Junkyard Gem: 2002 Pontiac Aztek

The General's Pontiac Division sold the Aztek for the 2001 through 2005 model years, and — despite enjoying something of a cultural rebirth in recent years — it is generally considered to be one of the worst cars of all time. The idea of using a minivan platform as the basis for a rough-and-tough-looking crossover with plenty of outdoor-lifestyle amenities wasn't the problem, since many vehicle manufacturers have printed bales of money using that formula. What doomed the Aztek was its hideous appearance and sticker price too lofty for its underemployed-at-the-time Generation X target demographic. Still, the Aztek proved to be perfectly suited for the outdoor activities that Coloradans love: hiking, camping, fishing, skiing, hauling mud-caked golden retrievers around, etc., and so you'll still find lots of Azteks on the roads of the Centennial State. Here's an Aztek Yellow Aztek (yes, that's really the paint color's official title) residing just a few rows from a '76 Checker Taxicab in a Denver self-service yard. Sure, it does look like a vehicle built to the specifications of a six-year-old who decreed a mashup between a Datsun F-10 and a Fisher-Price Little People Travel Together Airplane, but so what? There's a built-in air compressor to blow up your inflatable rafts and volleyballs, a tent attachment that turns the rear of the van into a camper, 12-volt power plugs all over the vehicle (years before this became commonplace on ordinary minivans and SUVs), and running-gear commonality with a jillion Ventures, Silhouettes, Montanas and Trans Sports. Buick managed to de-uglify the Aztek (somewhat) and sold it as the Rendezvous through 2007, but the Aztek never could win over many people with this face. I see plenty of Azteks and Rendezvouses in Denver-area wrecking yards, and I've documented a handful over the years. This one came fully loaded from the factory, with the Corvette-style heads-up display in full effect. The center console was a removable cooler, which was a great idea Â… except for the fact that this cooler holds five standard 12-ounce cans. Michigan residents tell me that this must have been intentional on the part of the Detroit-based Aztek designers, because Michiganders are expected to chug one beer out of a sixer as they walk from the liquor store to the car in the parking lot Â… which makes me extra cautious whenever I'm driving in the Wolverine State.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...