1965 Gto Pro Touring Rare Iris Mist Paint on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

Pontiac and McLaren once hooked up, and it was rad

Most of us would bend over backwards to have a chance to own a McLaren car, but few can afford such extravagance. That said, there’s a way you can get behind the wheel of a legitimate McLaren without breaking the bank. For 1989 and 1990, the Pontiac Grand Prix was offered in a limited-edition ASC-McLaren variant that featured tuning and updates from the iconic British automaker. Examples of this rare coupe rarely surface for sale, so itÂ’s surprising to see this low-mile 1990 Pontiac Grand Prix ASC-McLaren on eBay. The car is the result of a partnership between American Specialty Cars-McLaren (ASC-McLaren) and Pontiac. WeÂ’re not talking about the McLaren Formula 1 team or even the iconic McLaren road cars here. The McLaren connection comes from an arm of the automakerÂ’s powertrain engineering department. The Grand PrixÂ’s standard 3,1-liter V6 got a massage and a turbocharger, adding 65 horsepower for a total of 205 ponies and 225 pound-feet of torque. A four-speed automatic transmission sends power to the front wheels. That output is modest by todayÂ’s standards, and it wasnÂ’t outrageous even by 1990 standards, but the car returned a decent 0-60 mph time of around 7 seconds. The $5,000 ASC-McLaren package added a load of cool 1980s tech to the Grand PrixÂ’s interior, some of which is surprisingly advanced for the time. The car got a head-up display and a digital display on the dash. The steering wheel should be delightfully familiar to anyone who remembers a top-end Pontiac of the era, with the entire center of the wheel filled with buttons instead of the airbags we see today. The car had insanely padded bucket seats front and rear(!) with a distinctive pear shape.  Many sources peg production numbers between 2,500 and 3,500 units, so the car is relatively rare compared to its mass-produced Pontiac counterparts. This oneÂ’s got just 17,746 miles on the clock, too, and appears to be in excellent condition. ItÂ’s had just two owners and no reported accidents. The seller notes a little surface rust from the car being in storage so long. This era of GM cars tended to deteriorate quickly, so a bit of surface rust shouldnÂ’t be a huge issue. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1989 Pontiac 6000 STE AWD

During the middle to late 1980s, General Motors made a big push to grab back some of the sales swiped by makers of European luxury machinery during the previous decade. Around the top of the prestige pyramid, there was the Turin/Hamtramck-built Cadillac Allante taking aim at the Mercedes-Benz 560SEC and the super high-tech Buick Reatta trying to seduce away BMW and Jaguar shoppers; even the Riviera offered a futuristic touchscreen computer sorely lacking in anything out of Stuttgart or Bavaria. The General had a plan to take on the smaller German sporty sedans, too, and Pontiac of the "We Build Excitement" era offered a midsize sedan packed with modern hardware at a great price: the 6000 STE. Here's one of the rarest 6000 STEs of them all, an all-wheel-drive-equipped '89 found in a Denver-area yard last week. Any 6000 STE is extremely hard to find today; when I wrote about a front-wheel-drive 1987 6000 STE back in 2018, desperate owners of these cars filled my inbox with requests — sometimes demands —  for parts that continue to this day. Many of them pleaded with me to help them find an all-wheel-drive version, and now I have managed to find one at Colorado Auto & Parts in Englewood, just south of Denver (in fact, the same yard at which I shot the '87). You may recall CAP as the old-school yard whose owners built the amazing airplane-engined 1939 Plymouth pickup a few years back.  The all-wheel-drive system on the 6000 STE was introduced for the 1988 model year, and it became standard equipment on the 1989 STE. At this time, the automotive industry had taken note of the success of the idiot-proof all-wheel-drive systems offered by AMC and Audi/Volkswagen; Toyota began selling Americans all-wheel-drive Camrys, Celicas, and Corollas, while Ford offered the Tempo and Topaz with optional AWD and Subaru was just beginning to make the switch from manually-selected four-wheel-drive to genuine all-wheel-drive around that time (it took a few more years for everyone to standardize on the 4WD/AWD terminology we use today, though). The 6000 STE AWD was intended to compete with such all-wheel-drive-equipped sedans as the Audi 80 ($23,610), Audi 90 ($28,840), and BMW 325iX ($30,750); its $22,599 price tag (about $50,700 in 2021 dollars) certainly made it seem like a bargain compared to those cars. In addition to the all-wheel-drive system, 1989 6000 STE owners got a digital instrument panel and more switches and buttons than the Space Shuttle.