2007 Pontiac Grand Prix on 2040-cars

Auto blog

Porsche Boxster Spyder to get GT3's 4.0-liter flat six?

It's been a merry-go-round the past few months, the rumormill focused on what will power the next Porsche Boxster Spyder. First came hearsay of a flat-six going into the special edition of a model line known for its turbocharged four-cylinder engines. Then came tattling that the flat-six in question was the naturally aspirated, 4.0-liter from the 911 GT3. A couple of weeks ago we wrote " we'd be surprised if Porsche packed anything other than a turbocharged flat-four under the skin." But Autocar has a new report that, indeed, a downtuned version of the 500-horsepower 4.0-liter from the GT3's rump will move to the Boxster Spyder's midsection. The Autocar piece follows a Wheels magazine article from last November, and the prediction isn't outrageous. When Car and Driver reviewed the last Boxster Spyder, it wrote, "the hand-me-down six comes from the older 911 Carrera S, not to be confused with the new turbocharged 3.0-liter flat-six that powers the refreshed 911." If we can believe a recent report from Automobile about the 992-series 911 due later this year, the same thing is happening: The 991.2-series GT3 bequeaths its powerplant to the smaller sibling, and the 992-series GT3 moves to a 3.8-liter, twin-turbo flat-six with around 550 hp. Autocar quotes Andreas Preuninger, the Porsche engineer leading the development of all of these wunderkinds, saying of the Boxster earlier this year, "Natural aspiration is one of our main USPs. ... [We] think we can achieve throttle response and immediacy a little bit better with an atmospheric high-revving engine than any kind of turbo." We'll guess that means, by inference, that the GT3 is about to age out of naturally-aspirated university. The limited-edition Boxster Spyder might carry the torch with the 4.0-liter, with output somewhere around 430 hp. The Cayman GT4 could do the same. Or, who knows, an evolution of the 375-hp, 3.8-liter flat-six in the previous Boxster Spyder might burble out of left field. We expect to see the Boxster Spyder late this year. Until then, we'll wait to see what the merry-go-round says next time the Zuffenhausen horse comes around. Related Video: Featured Gallery Porsche 718 Boxster Spyder spy shots View 13 Photos News Source: Autocar via JalopnikImage Credit: CarPix Rumormill Pontiac Convertible Luxury Special and Limited Editions Performance porsche 911 gt3

Junkyard Gem: 1987 Pontiac Firebird

From 1967 through 2002, the Pontiac Division offered the Firebird, close sibling to the Chevrolet Camaro. By the third generation, which debuted for the 1982 model year, it became more difficult to tell the two F-body cars apart at a glance and the Pontiac-exclusive engines of the earlier years disappeared, but the Firebird still retained its own personality and its own position in the GM marketing hierarchy. I still find the occasional 1982-1992 Camaro as I search car graveyards for interesting stuff, but the corresponding Firebirds have become scarce in recent years. Here's a base-engine-equipped '87, its Bright Red paint (yes, that was the official name for the color) faded by the Colorado sun as it awaits the crusher. Firebird shoppers had their choice of three engines in 1987: A 5.7-liter Chevy V8 (210 hp), a 5.0-liter Chevy V8 (205 hp) and the same 2.8-liter 60° V6 that went into the Fiero and countless front-drive GM sedans (135 hp). This car has the base engine. The third-gen F-body didn't weigh much (3,105 pounds for the '87 with six-banger, about what a 2020 Corolla weighs), so 135 horses was tolerable. Plenty of these cars got T-5 5-speed manual transmissions, but this one got the two-pedal setup. Camaro wheels, of course. Our Friend the Carburetor didn't disappear from new cars until the early 1990s in the United States, though electronic fuel injection had become very commonplace by 1987. Still, GM considered this car's EFI worth a door-handle brag. It's not worth fixing up a mashed six-cylinder third-gen Firebird, so we can see the route this car took to its final parking space. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When you're about to be beaten to a pulp by catcalling, Olds-driving thugs, run to the Firebird! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So much big hair in these late-1980s Pontiac ads! Featured Gallery Junked 1987 Pontiac Firebird View 24 Photos Auto News Pontiac Automotive History Coupe Firebird pontiac firebird Junkyard Gems

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.