2004 Pontaic Grand Prix on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Autoblog Classifieds finds: 1987 Pontiac Fiero GT

Autoblog's free Readers' Used Car Classifieds section is a great place to list your car for sale, and because these are readers, they often list really interesting cars. Occasionally we find interesting listings, and tell you what's special about them. This 1987 Pontiac Fiero was listed for sale at the time of this writing, but if the listing expires by the time you read this, feel free to browse for other great finds. Thirty years after General Motors stopped building it, the Pontiac Fiero might have finally emerged from the darkness. First, it was a humble commuter car that just happened to be a mid-engined coupe, then it was a re-skinnable basis for Fierorraris or other slightly strange kit cars, and then it made some Worst Cars of All Time lists due to its econobox ingredients, including its Chevy Citation suspension parts. But after a few decades, even the most mediocre car will become interesting as most of the examples built have been run into the ground; why not then the Fiero? The story of the Fiero is paralleled by a number of GM products, as it improved constantly the longer it was built, and by the time of the last model years it was quite decent indeed. And then the plug was pulled. The Fiero might not be a Toyota MR2 or even a Fiat X1/9, but it was made in two body styles, the notchback and the fastback, the latter of which looks especially good now. The Fiero also remains quite affordable, and the plastic body panels do not rust, unlike with the two aforementioned cars. This 1987 car advertised for sale at Autoblog Classifieds does not yet benefit from the 1988 cars' improved suspension, but thanks to its low, low 47,000-mile odometer reading, it looks to be in tip-top shape. The automatic transmission is just the three-speed affair, though, rendering the V6 car here more of a cruiser than a fiery hot canyon carver. Perhaps that has contributed to its good condition, along with the lack of possibly leaky T-tops. Could the Fiero have aged better than your Hall & Oates tapes? Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.