1967 Pontiac Grand Prix Base 6.6l Convertible No Reserve on 2040-cars

Auto blog

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

Why Pontiac should come back and how it can be relevant again

When I was a kid growing up in Metro Detroit, our family was always entwined in the General Motors empire. My dad and some of our relatives worked for GM in various capacities, and we had our fair share of Chevrolet, GMC, and even Buick products in our humble driveway. However, it was my Uncle Ed that always had a vehicle from the one GM brand that always appealed to me the most: Pontiac. Seeing him pull up in his Pontiac 6000 and later the '90s era Grand Prix sedan that replaced it was always an exciting occasion, and both of these models also reflected the playful spirit that once defined the Pontiac brand. Back when Pontiac first got its performance groove on in the '60s, names such as GTO, Firebird, as well as Bonneville became iconic nameplates in the broader muscle car era. The '80s saw Pontiac lose some of its styling heritage, but also try new things at the same time including turbocharging as well as the mid-engine sports car with the flawed but still sleek Pontiac Fiero. When the Pontiac brand was shuttered in 2009, it was a mere few years after I earned my drivers license, and also when Pontiac was just beginning to regain some of its lost luster. Granted cookie cutter efforts like the Pontiac G3, (Chevrolet Aveo) G5, (Chevrolet Cobalt) and G6 (Chevrolet Malibu) certainly did not help matters during Pontiac's final years on the market, but two models in particular offered a compelling glimpse into what could've been for the storied brand. The first was the Pontiac Solstice roadster/coupe. Originally introduced as a concept back in 2004, and championed by everyone's fighter jet flying auto executive Bob Lutz, the Solstice was designed to be a serious competitor to the Mazda Miata, and while its interior ergonomics were flawed and the top solution not ideal. It proved to be a fun little car to drive, and also a sales success for Pontiac with initial demand exceeding expectations.This was especially due to its lineup of engines with the 2.0 liter LHU turbocharged four-cylinder engine delivering 260 horsepower in GXP variants. The second and (inarguably my favorite Pontiac model) was the Pontiac G8 sedan. Originating in Australia as the Holden Commodore VE, the G8 was designed to rectify the multitude of sins created by the last generation Bonneville. Front wheel drive was pitched in favor of rear wheel drive, and for the first time in a long time interior ergonomics and cladding free exterior styling were key building blocks for success.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...