Fl Clean Sunroof 4 Cyl Pw Pl Monsoon Ac Auto Good Miles Alloys Records Non Smoke on 2040-cars

Auto blog

Junkyard Gem: 1989 Pontiac 6000 STE AWD

During the middle to late 1980s, General Motors made a big push to grab back some of the sales swiped by makers of European luxury machinery during the previous decade. Around the top of the prestige pyramid, there was the Turin/Hamtramck-built Cadillac Allante taking aim at the Mercedes-Benz 560SEC and the super high-tech Buick Reatta trying to seduce away BMW and Jaguar shoppers; even the Riviera offered a futuristic touchscreen computer sorely lacking in anything out of Stuttgart or Bavaria. The General had a plan to take on the smaller German sporty sedans, too, and Pontiac of the "We Build Excitement" era offered a midsize sedan packed with modern hardware at a great price: the 6000 STE. Here's one of the rarest 6000 STEs of them all, an all-wheel-drive-equipped '89 found in a Denver-area yard last week. Any 6000 STE is extremely hard to find today; when I wrote about a front-wheel-drive 1987 6000 STE back in 2018, desperate owners of these cars filled my inbox with requests — sometimes demands —  for parts that continue to this day. Many of them pleaded with me to help them find an all-wheel-drive version, and now I have managed to find one at Colorado Auto & Parts in Englewood, just south of Denver (in fact, the same yard at which I shot the '87). You may recall CAP as the old-school yard whose owners built the amazing airplane-engined 1939 Plymouth pickup a few years back.  The all-wheel-drive system on the 6000 STE was introduced for the 1988 model year, and it became standard equipment on the 1989 STE. At this time, the automotive industry had taken note of the success of the idiot-proof all-wheel-drive systems offered by AMC and Audi/Volkswagen; Toyota began selling Americans all-wheel-drive Camrys, Celicas, and Corollas, while Ford offered the Tempo and Topaz with optional AWD and Subaru was just beginning to make the switch from manually-selected four-wheel-drive to genuine all-wheel-drive around that time (it took a few more years for everyone to standardize on the 4WD/AWD terminology we use today, though). The 6000 STE AWD was intended to compete with such all-wheel-drive-equipped sedans as the Audi 80 ($23,610), Audi 90 ($28,840), and BMW 325iX ($30,750); its $22,599 price tag (about $50,700 in 2021 dollars) certainly made it seem like a bargain compared to those cars. In addition to the all-wheel-drive system, 1989 6000 STE owners got a digital instrument panel and more switches and buttons than the Space Shuttle.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

This classic Firebird restomod swallowed a Prius

It takes an unusual eye to look at a 1967 Pontiac Firebird and see the Toyota Prius hidden inside. But that's just the kind of eye that a creative mechanic known online as "Bill the Engineer" has. Bill is updating his old Firebird into a true classic for the 21st century and has documenting the changes over at Priuschat and EcoModder. The TL,DR version of the story: he's replacing the worn-out powertrain with the gas-electric hybrid one from a Prius V, because it turns out the two vehicles have almost exactly the same wheelbase. Bill, who's from Columbus, Ohio and doesn't want his full name used, said in his posts on the conversion project that he's made many memories with this vehicle since buying it back in 1979. Since then, a few moves, a few decades, and some time in storage meant that the car would no longer function as he wanted it to. As he wrote, "when it comes to mice in the vehicles IT IS WAR." His solution is to make new memories and making a greener vehicle, and so we wanted to ask him how things have been going. Bill's been traveling a bit recently, but told AutoblogGreen that he's now figuring out the next steps for this amazing and complicated project. "I always plan things out before I do them," he said. That's the only way something like this can work. ABG: I think we have to start with what gave you the inspiration for this project. Was it simply that you had the two cars and wanted to see them merged into one cool mashup, or was it something else? "One day my wife wondered out loud if the car could be converted into a hybrid... The rest is history." Bill: I have been the owner of my 1967 Firebird convertible since 1979 when I bought it for $750.00. I drove it for years and made many memories. Afterward it was in storage for many years during which time mice at their way into the car and trashed the interior and wiring. I started working on a conventional restoration but always ran into major problems with hidden corrosion, electrical issues and an engine on its last legs. The car was never going to be as nice as I wanted going the conventional route. One day my wife wondered out loud if the car could be converted into a hybrid like our two daily driver Prii. That got me thinking about how it could be done. The rest is history... ABG: It looks like you started in late 2014. Have things gone well since then, or has it been one hassle after another? What has been the biggest setback, and what were the biggest victories?