Rolling Shell Project Car - No Engine Or Transmission on 2040-cars

Auto blog

Drive plays Smokey, Bandit with turbo Trans Am

The modern trend for powertrains can be summed up with the simple maxim: cut displacement and add forced induction. Whether you are looking at the just-introduced 2016 Chevrolet Cruze or a BMW M3, this adage holds true. However, Pontiac's attempt at the idea goes all the way back in 1980 with the Firebird Trans Am and its turbocharged 4.9-liter V8. Drive's Mike Musto takes out a 1981 example to explain what makes this largely forgotten muscle car so special, and it certainly isn't performance. While a 4.9-liter V8 might sound like a lot in the modern world, keep in mind that only few years before the second-generation Trans Am was available with up to a staggering 7.5-liters of displacement. Turbocharging of road cars in the early '80s was quite archaic by today's standards, and the Firebird only managed around 200 horsepower with this mill. Without much go, the turbo Trans Am made up for a lack of power with lots of show. As Musto points out, the famous flaming chicken adorns practically every surface you can see on the coupe, and boost lights on the hood illuminate when the turbo is spinning. Musto still finds a lot to like about the turbo Trans Am. He even calls it "Burt Reynolds as an automobile." Find out why the coupe is so special in this entertaining clip.

A case for Pontiac's return

Sadly, many brands have disappeared off of the automotive landscape over the decades. Many people have imagined over the years of restarting defunct automotive brands. A few of those dreamers even made prototypes to shop around and to established connections with investors. But, alas poor Yorick, however valiant an effort, many brands are shuttered for good, rarely to be heard of again except in historical tales or maybe seen in car shows. So, what do you do when you win the lottery? Not just any lottery... In fact, it is a lottery that takes care of you and your loved ones for life? You and your family don't have to work, ever. You can give to charity, pay other people to do those projects that you've been putting off, and so on and so on. But, you're still a Car Nut right? There begins the conundrum. Do you buy and fix cars, new premium cars, old muscle cars, or classics, or maybe, just maybe, do you buy the rights to an old departed automotive brand and bring it back to life. Hmm. Which brand? The problem with the old Pontiac was that it was an additional badge engineered vehicle in the portfolio of GM. The meant the brand was diluted by competition from its own parent company, in addition to the competition outside the camp. So, if it were to come back, it would have to be different. Yet, it would still need to keep true to its roots at the same time in order to wake up its armies of existing fans. Even those that aren't fans of Pontiac cannot deny that Pontiac has a long heritage of legendary vehicles. So do Packard, and Studebaker, and others. So, why would a lottery winner choose Pontiac as the marque to bring back? That's easy! Pontiac's long heritage is closely tied to performance vehicles that made many of a teenager drool. Even more important though is that Pontiac is still fresh on people's minds. The brand itself is only recently departed. So, Boomers, Generation X, and Millenials all would all be able to identify with it as opposed to brand names that disappeared multiple decades ago and that now have a more limited appeal. The return of Pontiac couldn't just be another launch of a badge engineered vehicle. It would have to be performance oriented, yes. But, it would have to be unique in some way, a niche brand. What niche though? Look at the automotive landscape now and you see that Tesla is the one out there grabbing at the wide open electric niche with success.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...