1995 Pontiac Firebird Firehawk on 2040-cars

Auto blog

Porsche still deciding on one or two new 911 plug-in hybrids

Back in March, Porsche CEO Oliver Blume told Autocar that the coming Porsche 911 plug-in hybrid "will be the most powerful 911 we've ever had." That quote portended a 992-series 911 with 700 horsepower or more. A new report in Auto Express, however, suggests Porsche is having energetic debates about just what the 911's hybrid strategy will be, and that the only agreed-upon plug-in hybrid 911 so far is a milder version to sit in the middle of the range. Putting all our rumors in a row, in January, Automobile reported on an electrically-assisted 911 with 485 hp and 561 pound-feet of torque. The new AE piece effectively endorses that, saying the mid-range hybrid would follow the program established by the all-wheel drive Cayenne e-Hybrid that produces a combined 455 hp and 516 lb-ft. The 911 would naturally use a flat-six instead of the Cayenne's 3.0-liter V6, and the sports car would be tuned for better sound response and sharper reflexes. AE says fuel economy for this hybrid should be at least 80 eMPG, with emissions of less than 80 grams per kilometer. The current base Carrera is currently rated at a maximum 38.2 mpg in the UK, with minimum emissions of 169 g/km. The hybrid, fitted with a double-clutch gearbox and Porsche's mechanical all-wheel-drive system, could run from a stop to 62 miles per hour in less than four seconds, making it more efficient than a base Carrera and much faster than a Carrera 4S. AE says there remains only "the potential for Porsche to add a second, more powerful hybrid 911," and says its sources claim that's what's "causing the most consternation behind closed doors." This one would be the twin-turbocharged, 700-hp beastie that, as a series production car, would have a hard time not usurping the 540-hp Turbo, 580-hp Turbo S, and 607-hp Turbo S Exclusive. True, the hybrid would be handicapped with a 550-pound battery pack, but the instant acceleration and handling benefits of electric AWD — with no connection between the axles — could provide the final edge over the other three. As such, it makes sense that there'd be a whole lot of debate about a flagship 911 hybrid. On the other hand, such a monster seems like an eventuality in view of Porsche's electrified aspirations, the lessons gained from the 918 Hybrid and the 919 Hybrid Le Mans racer, and the fact that CEO Blume has already spoken. The Stuttgart carmaker expects a sales mix of 25 percent electric, 25 percent hybrid, and 50 percent conventional powertrains by 2025.

Junkyard Gem: 2003 Pontiac Grand Am GT 30th Anniversary Edition

With the era of the 1960s-style muscle car ended by the ever-more-stringent emissions regulations, insurance costs and higher gasoline prices of the early 1970s, GM's Pontiac Division was ready with a lineup of flash-enhanced machines packed with (alleged) European-style performance and styling. Three of them were based on the midsize A Platform for 1973: the LeMans, the Grand Prix and the brand-new Grand Am. The 1973 Grand Am was cheaper than the luxed-up Grand Prix, but still had a BMW-ish interior and wild exterior styling; sales weren't great, but the 30th anniversary of this car seemed sufficiently momentous for Pontiac to create a special-edition package for its soon-to-be-axed successor. Here's one of these rare machines, spotted recently in a Denver car graveyard. The original rear-wheel-drive Grand Am was built for the 1973-1975 and 1978-1980 model years, but its similarity to the much cheaper LeMans kept sales numbers unimpressive. When the Grand Am name was revived for a Pontiac-badged compact on the front-drive N Platform in the 1985 model year, however, it became a big seller right away and stayed that way into our current century. The N-Body Grand Am was built through 2005, with platform updates for the 1992 and 1999 model years. Along the way, it was sibling to such cars as the Oldsmobile Calais, Buick Somerset, Chevrolet Beretta and Oldsmobile Alero. By 2003, though, the ground was shifting under Pontiac's feet. The iconic Firebird had been discontinued the previous year, and even the Grand Prix's days were officially numbered. Oldsmobile would be gone after 2004, and the entire Pontiac vehicle lineup would be shaken up soon after. The last year for the Grand Am (and the Sunfire) would be 2005, with the G6 taking its place. With all that going on, why not offer a 30th Anniversary package? After all, the Grand Prix got a 40th Anniversary Edition for 2002. Our reviewer described this car as "leaner, trimmer and more contemporary" at the time, but made no mention of the 30th Anniversary Edition. The VIN says this car is a top-grade GT1 sedan, with an MSRP of $22,325 (that's about $39,920 in 2023 dollars). Two engines were available in the 2003 Grand Am: a 2.2-liter Ecotec four-cylinder with 140 horsepower and a 3.4-liter pushrod V6 with either 170 or 175 horsepower. This car has the 175-horse V6, complete with "Ram Air" cold-air induction. That name goes way back in Pontiac history.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...