1995/2002 Pontiac Trans Am. Loaded Out!!!!!! Batman Car. 90,000 Original Miles!! on 2040-cars

Auto blog

Porsche Syberia RS rally car is what you make when you need a Hummer that's fast

Some history: The Porsche 911's first-ever race was the 1965 Monte Carlo rally, entered because Porsche's PR man at the time wanted to show how much the future icon could do. A year later, Porsche began selling an optional rally kit for the 911 that included Recaro seats, a roll bar, and adjustable Koni dampers. Porsche produced factory rally racers until the early 1970s, winning Monte Carlo three times in a row before letting privateers carry the torch so the factory could focus on campaigning in the East Africa Safari. After years of painful lessons, when Porsche took its brand-new 1978 911 SC to the safari, the 3.0-liter flat-six coupe was hours away from winning the race before damaging the suspension, demoting the car to second place. Porsche fans wanted their own replicas, and finding the new 911 to be an affordable option, the SC — built from 1978 to 1983 — went from denoting "Super Carrera" to "Safari Car."   Porsche took a big step up in with the 953 rally car. Built to win the 1984 Paris-Dakar, which it did, the 953 introduced the four-wheel-drive system Porsche would evolve for the 959 in 1985 and the 964-series 911 in 1989, as well as the now-unforgettable 911-based Rothmans livery. All of this is what's fueling today's 911 Safari Car revival around the world. Almost all of today's builds start with the so-called G Model 911s, produced from 1973 to 1989, usually focusing on the SC and the Carrera that ran from 1984 until 1989.  Fast forward to 2007 when a mysterious crew organized the TransSyberia Rally, a "sports-touring" event that stretched 4,500 miles from Moscow to the capital of Mongolia, Ulaanbaatar. Of the 34 vehicles that entered, 25 were Porsche's purpose-built Cayenne S Transsyberia Edition.  Put this all in a pot and you have the beginnings of the car that brings us here, the Syberia RS. It's said that a German fellow by the name of Kai Burkhard wanted to buy a Humvee, but the low top speed, around 50 miles per hour, put him off. So instead, he imported a 1986 911 "in collector condition" from Japan with the idea of rebuilding it to provide almost all the off-road fun he could have had in the H1. Burkhard tapped the Tailor Made department at German suspension designer H&R, and the two set to work creating a build like the 953 Dakar winner.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The owner's been mum on most of the details including engine revisions.

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.