on 2040-cars

Auto blog

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

Rent the 1967 Pontiac GTO from the XxX films now on Turo

The process of renting a car usually ranges from mildly annoying to "I'm calling corporate to get you fired." Plainly, it sucks, but sometimes you're left with no alternative. Turo, a peer-to-peer carsharing network, has created what's essentially the AirBnB for cars. Like AirBnB, the quality and variety of the rides varies based on location. If you're in Tucson, Ariz., in the next week, go check out this 1967 Pontiac GTO convertible before the release of XxX: The Return of Xander Cage. Promotions and marketing aside, this is still the opportunity to drive one of the original muscle cars. It's not clear if this is an original GTO or a Pontiac Tempest that was converted, but does it really matter? Old cars never drive as well as you hope, so, as long as it looks and sounds awesome, who cares? The owner listed on Turo is Xander C., Vin Diesel's character from the XxX franchise. This is the car that was used in the original 2002 film, and from the photos it appears to be in better shape than many other movie cars. The exterior is mostly stock, with some slight modifications to the lighting, wheels, exhaust, and trim, with the addition of a funky looking hood scoop that the listing claims shoots flames. It's not clear if it functions as an actual intake because there aren't any notes about what rests under the hood. The listing does ask for premium fuel, so more than likely it's some variation of a high-compression V8. Inside, the dashboard looks like someone raided the AutoZone accessory aisle. There are gauges, dials, toggle switches, and readouts galore. The listing also claims the Goat is packing a rocket launcher and a weapons stash under the seat. $999 per day isn't cheap, but it's less than you'd pay for a day with one of the rent-an-exotic shops you see in Los Angeles or New York. If you're not in Tucson or the price is a little too steep, Turo has what it's dubbed the Adrenaline Collection. The name may be hyperbole, but the lineup of cars is actually really solid. A quick glance reveals a 2015 Lamborghini Huracan, 2001 Ferrari 360 Spider, and a 1969 Jaguar E-Type. The car list keeps expanding, so if this proves popular, look for more cool stuff in the future. Related Video: News Source: Turo Read This TV/Movies Pontiac Performance Classics

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...