Pontiac Fiero Ferrari 328 Gtb Kit Car on 2040-cars

Auto blog

The U-2 spy plane needs high-performance cars to help land

Typically, aircraft deploy their landing gear from three main points. Most military aircraft, for example, deploy two gears at the back and one forward, like a tricycle. Some civilian aircraft flip the layout, with two in front and one in back - tail-draggers. The U-2 Dragon Lady is wildly different than any of these. With a 103-foot wingspan but a body that's just 63-feet long, the layout of the U-2 makes a traditional landing setup infeasible. Instead, the U-2 utilizes a pair of wheels, one up front and one in back. With such a bizarre layout, landings are so tough that since the U-2's earliest flights at Area 51, the US Air Force has used high-performance chase cars to guide the pilot down safely. The landing process isn't over there, though. As this video from Sploid shows, balancing out the aircraft to fit the detachable "pogos" – think training wheels for spy planes – is a comical procedure requiring a number of airman using their full body weight to even out the U-2. This video also recaps some of the great vehicles that have served as chase vehicles for this legendary spy plane. They include Chevrolet El Caminos, and the Fox-body Ford Mustangs so favored by the California Highway Patrol. For the last several years, the USAF has utilized products from General Motors, using fourth-generation Chevy Camaros, before switching over to the Pontiac GTO and most recently, the awesome Pontiac G8. It's fair to say that if you're a gearhead in the Air Force, this is the job you want. Check out the video, embedded up top. News Source: Sploid via YouTubeImage Credit: Sploid Chevrolet Ford GM Pontiac Military Performance Videos

Junkyard Gem: 1996 Pontiac Grand Am SE Coupe

The Grand Am was the best-selling Pontiac model in the United States for every year of the 1990s, and it outsold most of its N-Body platform-mates (including the Chevrolet Corsica/Beretta) during nearly all of that decade. A sporty-looking compact with two or four doors, the Grand Am offered true 1990s radness—and, in some cases, respectable performance — at a good price. Today's Junkyard Gem is a nicely preserved example of the facelifted 1996 Grand Am, found in a Denver-area car graveyard. This is an SE Coupe with base engine and transmission, the most affordable Grand Am available in 1996. List price was $13,499, or about $26,523 in 2023 dollars. The factory-issued Monroney sheet for this car was still inside, so we can see that the original buyer got the car at Bob Ruwart Motors in Wheatland, Wyoming (about 175 miles up I-25 from this Pontiac's final parking spot), and paid a total of $16,054 ($31,543 in today's money) after the cost of options and the destination charge. The '96 Grand AM SE buyer had to pay extra for cruise control, air conditioning, power windows, rear glass defogger and other features we now take for granted on new cars. The base engine was the 2.4-liter Twin Cam four cylinder, a member of the screaming Oldsmobile Quad 4 family. This one was rated at 150 horsepower and 155 pound-feet. A 3.1-liter V6 with 155 horses and 185 pound-feet was an option. If you got the V6 in your '96 Grand Am, however, you couldn't get a manual transmission. This car has a proper five-speed manual, which made for fun driving with the high-revving Twin Cam engine in a machine weighing just 2,802 pounds (which is quite a bit less than what the current Honda Civic weighs). It traveled just over 160,000 miles during its 27 years on the road. The body and interior were still in fairly good condition when the car arrived here, so we can assume that some expensive mechanical problem doomed this car. Perhaps the original clutch wore out and the owner didn't consider it worth replacing. After all, a mid-1990s Detroit two-door with a transmission most people can't drive isn't worth much these days. Though nobody knew it when this car was new, the Grand Am would be gone in nine years and Pontiac itself would get the axe five years after that. It makes the ordinary extraordinary. Husbands and wives would argue for 12 hours over who got to drive the Grand Am, if we are to believe this ad. Proud sponsor of the 1996 Olympic team.

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.