1988 Pontiac Fiero Gt on 2040-cars

Auto blog

Pontiac should come back as a performance division for GM

For decades the Pontiac brand was known as GM's performance brand. From the 1964 Pontiac GTO, to the 1967 Firebird, to the 1984 Fiero, to the 2006 Solstice Turbo, and 2009 G8 GXP, Pontiac had a reputation for building exciting cars, with bold styling and performance to back it up. When the Camaro was killed off in 2002, the Pontiac Firebird died off with it, and the last Pontiacs were built in early 2010. But with names like G3, G4, and G6, Pontiac's performance image had long faded from it's earlier glory days. My idea for Pontiac's revival would be to bring it back as a dedicated performance marque similar to Chevy's Super Sport (SS) line up of years past. First, and most obvious would be to bring back the Pontiac Firebird. Offering the entry-level model with the Camaro's 275HP turbo 4 cylinder engine, then having the Camaro SS's 455HP V8, but also offering a halo model Trans Am that is a revamped Camaro ZL-1 along with it's tire-shredding 650HP, supercharged V8 and race tuned suspension. Secondly, I would bring back the GTO. Which I would base on the current Chevy SS, but I would use the full 455-horsepower LS4 V8 (rather than the 415-hp setup that it has now). Furthermore, I would add the impressive 650-hp supercharged V8 to provide real competition to the Charger Hellcat. Importantly, I would make sure that the new GTO had bold, distinctive styling that really set it apart. I understand that purists would want any Pontiac GTO to be a two-door coupe, but I think that they could forgive that if the new GTO was an outstanding American performance car. Next, I would take the Buick Cascada convertible, add much bolder styling, swap in the Camaro's 275-hp turbo engine, and tune up the suspension to provide more performance than luxury (without being harsh). And finally I would round out the line up by using the new 2018 Traverse , but use the new, bold Pontiac design language to spice up the model's looks, tweak the engines for more power, and again provide a performance suspension that matches the model's new sporty looks. Obviously, having a high performance Pontiac model line up would steal away some sales from Chevy, Buick, and Cadillac models. But I think that it would more than make up for this by also stealing away sales from competing brands. Related Video: Image Credit: Copyright 2012 Drew Phillips / AOL Pontiac Classics brands open road

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.