1987 Pontiac Fiero Only 221 Miles on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

This or That: 2005 Chrysler Crossfire SRT6 vs. 1984 Pontiac Fiero

Welcome to another round of This or That, where two Autoblog editors pick a topic, pick a side and pull no punches. Last round pitted yours truly against Associate Editor Brandon Turkus, and my chosen VW Vanagon Syncro narrowly defeated Brandon's 1987 Land Rover. In fact, it was, by far, the closest round we've seen, with 1,907 voters seeing things my way (for 50.8 percent of the vote) versus 1,848 votes for Brandon's Rover (49.2 percent). Sweet, sweet victory! For this latest round of This or That, I've roped Editor Greg Migliore into what I think is a rather fun debate. We've each chosen our favorite terrible cars, setting a price limit of $10,000 to make sure neither of us went too crazy with our automotive atrocities. I think we've both chosen terribly... and I mean that in the best way possible. 2005 Chrysler Crossfire SRT6 Jeremy Korzeniewski: Why It's Terrible: Taken in isolation, the Chrysler Crossfire isn't necessarily a terrible car. In fact, it drives pretty darn well, and there's a lot of solid engineering under its slinky shape. Problem is, that engineering was already rather long in the tooth well before Chrysler ever got its hands on it, having come from Mercedes-Benz, which used the basic chassis and drivetrain in a previous version of its SLK coupe and roadster. Granted, the SLK was an okay car, too, but even when new, it hardly set the world on fire with sporty driving dynamics. Chrysler took these decent-but-no-more bits and pieces from the Mercedes parts bin – remember, this car was conceived in the disastrous Merger Of Equals days – and covered them with a rather attractive hard-candy shell. Unfortunately, the super sporty shape wrote checks in the minds of buyers that its well-worn mechanicals were simply unable to cash, though an injection of power courtesy of a supercharged V6 engine in the SRT6 model, as seen here, certainly helped ease some of those woes. In the end, Chrysler was left with a so-called halo car that looked the part but never quite performed the part. It was almost universally panned by critics as an overpriced parts-bin special, which, I must add, was damningly accurate. As a result, sales were very slow, and within the first few months, dealers were clearancing the car at cut-rate prices, just to keep them from taking up too much of the showroom floor. Why It's Not That Terrible, After All: I can speak from personal experience when discussing the Chrysler Crossfire. You see, I owned one. Well, sort of...

Porsche Syberia RS rally car is what you make when you need a Hummer that's fast

Some history: The Porsche 911's first-ever race was the 1965 Monte Carlo rally, entered because Porsche's PR man at the time wanted to show how much the future icon could do. A year later, Porsche began selling an optional rally kit for the 911 that included Recaro seats, a roll bar, and adjustable Koni dampers. Porsche produced factory rally racers until the early 1970s, winning Monte Carlo three times in a row before letting privateers carry the torch so the factory could focus on campaigning in the East Africa Safari. After years of painful lessons, when Porsche took its brand-new 1978 911 SC to the safari, the 3.0-liter flat-six coupe was hours away from winning the race before damaging the suspension, demoting the car to second place. Porsche fans wanted their own replicas, and finding the new 911 to be an affordable option, the SC — built from 1978 to 1983 — went from denoting "Super Carrera" to "Safari Car."   Porsche took a big step up in with the 953 rally car. Built to win the 1984 Paris-Dakar, which it did, the 953 introduced the four-wheel-drive system Porsche would evolve for the 959 in 1985 and the 964-series 911 in 1989, as well as the now-unforgettable 911-based Rothmans livery. All of this is what's fueling today's 911 Safari Car revival around the world. Almost all of today's builds start with the so-called G Model 911s, produced from 1973 to 1989, usually focusing on the SC and the Carrera that ran from 1984 until 1989.  Fast forward to 2007 when a mysterious crew organized the TransSyberia Rally, a "sports-touring" event that stretched 4,500 miles from Moscow to the capital of Mongolia, Ulaanbaatar. Of the 34 vehicles that entered, 25 were Porsche's purpose-built Cayenne S Transsyberia Edition.  Put this all in a pot and you have the beginnings of the car that brings us here, the Syberia RS. It's said that a German fellow by the name of Kai Burkhard wanted to buy a Humvee, but the low top speed, around 50 miles per hour, put him off. So instead, he imported a 1986 911 "in collector condition" from Japan with the idea of rebuilding it to provide almost all the off-road fun he could have had in the H1. Burkhard tapped the Tailor Made department at German suspension designer H&R, and the two set to work creating a build like the 953 Dakar winner.  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The owner's been mum on most of the details including engine revisions.