1971 Pontiac Catalina Stageway Airporter Limo on 2040-cars

Auto blog

Vitruvian Energy crowdfunding to make EEB, a trashy biofuel

When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

MotorWeek's 80's GM muscle coupe roundup includes Regal GN and Monte Carlo SS

Even with just four brands in the family, General Motors still represents a performance powerhouse. Between the Chevrolet Corvette Z06, Camaro Z/28, Cadillac CTS-V and ATS-V, The General can still deliver plenty of thrills. The 1980s, though, saw the brand go even crazier with performance. While the Camaro and Corvette were still around back in the day, GM had a number of other interesting performance offerings. The Bowtie was complemented by the long-deceased Monte Carlo SS, while the now-defunct Pontiac and Oldsmobile offered the Grand Prix and thumping 442, respectively. And Buick, which isn't short on performance with its Regal GS and Verano Turbo, offered a much more serious vehicle, in the form of the Grand National (not to mention the Darth Vader-spec GNX). MotorWeek, in its hugely entertaining retro flashbacks, looks back on these three long-lost GM performance icons, and it's just as good as you might expect. News Source: MotorWeek via YouTube Buick Chevrolet GM Pontiac Coupe Performance Classics Videos buick grand national chevy monte carlo oldsmobile 442