1968 Pontiac Catalina Convertible on 2040-cars

Auto blog

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Lutz says Washington killed Pontiac, next G6 was to be ATS derivative

How many people think Buick or GMC should have gotten the axe instead of Pontiac? You can't see it, but I'm raising my hand. Autoweek reports that former Vice Chairman of GM, Bob Lutz, has indicated that things didn't have to end up the way they did.
"The Feds said, 'Yeah, how much money have you made on Pontiac in the last 10 years?' and the answer was, 'Nothing.'"
In a talk given at the Petersen Automotive Museum for the Inside the MotoMan Studio series, Lutz says "The Feds said, 'Yeah, how much money have you made on Pontiac in the last 10 years?' and the answer was, 'Nothing.' So, it goes. And when the guy who is handing you the check for $53 billion says, 'I don't want Pontiac, drop Pontiac or you don't get the money,' it doesn't take you very long to make up your mind." Lutz even added that the next-generation Pontiac G6 would have benefitted from the rear-wheel-drive platform of the Cadillac ATS. How awesome would that have been?

Junkyard Gem: 1991 Pontiac Grand Am LE with Quad 4 Engine

GM introduced the N-Body compact platform with the Oldsmobile Calais and Pontiac Grand Am for the 1985 model year and continued building N-based cars through 1998. Most of these cars weren't interesting from an enthusiast standpoint, but a handful rolled off the assembly line with raucous DOHC Oldsmobile Quad 4 engines and manual transmissions, and those cars were plenty of fun. Here's a 1991 Grand Am with that rare setup, photographed in a self-service yard in California's Central Valley. The base engine in the 1991 Grand Am was the 110-horsepower, 2.5-liter pushrod Iron Duke, an engine that might have been fine on a Romanian tractor in 1953 but had no place on an American street car as the 21st century approached. Fortunately, GM started bolting the modern 2.3-liter DOHC Quad 4 engine into 1988 cars, and this was a proper four-cylinder. The Quad 4 ran a little rough and uncivilized, and it had its share of reliability problems, but you could rev the piss out of it and it made good power. In 1991, this engine was rated at 180 hp. That made this 2,592-pound sedan pretty quick. Unfortunately, the slushboxization of America had progressed with depressing rapidity during the 1980s, and by 1991 most Grand Am buyers — even the ones who opted for the Quad 4 — chose the automatic transmission. That didn't happen with this car, though — it boasts a rugged Getrag 5-speed instead of the happiness-amputating three-speed automatic. Yes, that's the kind of odometer reading you'd expect to see on an Accord or Maxima from this era. Someone loved this car and took care of it. Here we see an interesting mix of 1980s and 1990s car-radio technology. CD players in cars were still costly luxury items in 1991, seldom seen in affordable cars like the Grand Am, while 1980s-style slider-style EQ controls were on the way out. This Delco unit straddles both decades nicely. I seek out Quad 4-equipped cars during my junkyard travels, and I have photographed quite a few: this '89 Cutlass Calais, this '90 Cutlass Calais, this '90 Grand Am, this '91 Quad 442, this '93 Achieva SCX, and this '98 Cavalier Z24. It's a shame that Buick never put the Quad 4 in the Reatta, which was a fine car ruined by a somnolent and obsolete V6. The music in this ad is even more early-1990s than Crystal Pepsi. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.