2004 Pontiac Bonneville Se - Great Shape - Tons Of Maintenance Done! on 2040-cars

Auto blog

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.

Junkyard Gem: 2002 Pontiac Aztek

The General's Pontiac Division sold the Aztek for the 2001 through 2005 model years, and — despite enjoying something of a cultural rebirth in recent years — it is generally considered to be one of the worst cars of all time. The idea of using a minivan platform as the basis for a rough-and-tough-looking crossover with plenty of outdoor-lifestyle amenities wasn't the problem, since many vehicle manufacturers have printed bales of money using that formula. What doomed the Aztek was its hideous appearance and sticker price too lofty for its underemployed-at-the-time Generation X target demographic. Still, the Aztek proved to be perfectly suited for the outdoor activities that Coloradans love: hiking, camping, fishing, skiing, hauling mud-caked golden retrievers around, etc., and so you'll still find lots of Azteks on the roads of the Centennial State. Here's an Aztek Yellow Aztek (yes, that's really the paint color's official title) residing just a few rows from a '76 Checker Taxicab in a Denver self-service yard. Sure, it does look like a vehicle built to the specifications of a six-year-old who decreed a mashup between a Datsun F-10 and a Fisher-Price Little People Travel Together Airplane, but so what? There's a built-in air compressor to blow up your inflatable rafts and volleyballs, a tent attachment that turns the rear of the van into a camper, 12-volt power plugs all over the vehicle (years before this became commonplace on ordinary minivans and SUVs), and running-gear commonality with a jillion Ventures, Silhouettes, Montanas and Trans Sports. Buick managed to de-uglify the Aztek (somewhat) and sold it as the Rendezvous through 2007, but the Aztek never could win over many people with this face. I see plenty of Azteks and Rendezvouses in Denver-area wrecking yards, and I've documented a handful over the years. This one came fully loaded from the factory, with the Corvette-style heads-up display in full effect. The center console was a removable cooler, which was a great idea Â… except for the fact that this cooler holds five standard 12-ounce cans. Michigan residents tell me that this must have been intentional on the part of the Detroit-based Aztek designers, because Michiganders are expected to chug one beer out of a sixer as they walk from the liquor store to the car in the parking lot Â… which makes me extra cautious whenever I'm driving in the Wolverine State.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...