1966 Pontiac Bonneville 6.4l on 2040-cars

Auto blog

Michigan floods from breached dams consume Pontiac Fiero collection

“WeÂ’ve never had an event like this,” Michigan's city manager Brad Kaye said in a Detroit News story. "What we're looking at is an event that is the equivalent of a 500-year flood." Kaye is referencing the catastrophic flood that occurred in central Michigan this week after heavy rainfall was compounded by two breached dams on the Tittabawassee River. Reports say the flooding forced evacuation of up to 10,000 residents, swallowed entire towns, and destroyed thousands of properties. No casualties have been reported, according to the Detroit Free Press, but car enthusiasts will be sad to learn a Pontiac Fiero shop and collection called Forever Fieros was decimated by the natural disaster. The Tittabawassee River is located about two hours, or roughly 140 miles, north of Detroit. It starts 20-30 miles further north and flows southeast as a tributary to the Saginaw Bay Watershed. Along the way, the Tittabawassee is held up by several dams, including the Edenville dam that failed and the Sanford dam that was breached during torrential downpours. According to NPR, the federal government took away the Edenville dam's license in 2018 and suggested it could not last through a major flood. Unfortunately, that prediction was proven accurate.  Forever Fieros is located in Sanford, Michigan, which is just below Sanford Lake, which is created by the Sanford dam. So when the Edenville dam north of Sanford broke, water from Wixom Lake flooded Sanford Lake, and a berm next to the Sanford dam was overwhelmed, according to MLive. Technically the dam did not fail, but the end result was the same: an entire town underwater. The Tittabawassee reportedly crested at 35 feet, or 10 feet above flood level and 1.1 feet higher than the previous record set in 1986. According to The Drive, the man in charge of Forever Fieros, Tim Evans, had time to attempt to save his vehicles from floodwater. He reportedly moved about 12 cars to a street that doesn't typically flood, but the water level was simply too high for that to matter. A floating pole barn also reportedly struck and damaged the  Forever Fieros building.  Worsening the situation is the fact that Evans was planning to hold an auction to sell many of the Fieros. As seen on Industrial Bid, he planned to sell 12 Fieros, Fiero GTs and a Fiero Formula, ranging from 1984 through 1988. The lots included a 1984 pace car, a Lamborghini Countach kit car, and a Fiero Cosworth Pontiac Super Duty 16-valve DOHC engine.

Check out the official 2013 Trans Am Hurst Edition commercial

The Poncho is dead. Long live the Poncho. Like certain other reoccurring personal maladies, the aftermarket community simply can't let the Trans Am go without another flare up. The guys at Trans Am Depot have worked up a quick commercial for their newest creation: The 2013 Trans Am Hurst Edition, and it watches pretty much like you'd expect it to. The footage is comprised of just about every TA male fantasy you can conceive of, from Daisy Dukes and white tank tops to tramp stamps, bikinis and ice cream cones. There simply aren't words for what you'll see below.
Of course, we like our T-Tops as much as the next guy. If you like what you see in the videos, you can pick up your very own TA by heading over to the Trans Am Depot site. The guys even have Chevrolet Camaro-based versions of the Pontiac GTO if the '77 TA treatment is too much for your tastes. Enjoy, but don't say we didn't warn you.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...