1961 Pontiac Bonneville Restomod on 2040-cars

Auto blog

Pontiac Aztek rises from the ashes of infamy in Firebird Trans Am guise

What if the Pontiac Aztek, one of the most widely ridiculed vehicles ever built, was reimagined with a little flair from one of the former brand’s more legendary cars? Well, it turns out that someone not only came up with that idea, but followed up on it. And so, we present to you the Pontiac Aztek Firebird Trans Am, uh, trim package? ItÂ’s not real, of course, but it comes from Abimelec Arellano, an Hermosillo, Mexico-based car designer with too much time on his hands who goes by the name Abimelec Design. Arellano redesigned the midsize SUVÂ’s wimpy front fascia to surprising success by simply adding widened fender flares and perhaps modernizing the headlights. He also went all-in embracing the AztekÂ’s abrupt, flattened rear end by removing the rear bumper lip, adding a slightly more aggressive rear spoiler to boot. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Elsewhere, the dominating and cheap-looking gray plastic under-cladding is gone in favor of body-color panels. Arellano also added some probably larger Pontiac Snowflake wheels with gold accents that really make them pop and play well against the signature Firebird decal dominating the hood. Commenters generally fall into one of two buckets. As one put it, “I never thought the Aztek could look this good.” Others implored Arellano to do a version with a T-top. Or as one Autoblog editor put it, “So it turns out the reason the Aztek was a laughingstock failure is that it didnÂ’t come in a Smokey and the Bandit Edition. Somewhere, a dude who got shouted down in a product-planning meeting years ago is vindicated.” Sold between 2001 and 2005, the Aztek arguably reached the pinnacle of its notoriety as the metaphor for the drab, underachieving life of Walter White in AMCÂ’s meth drama, “Breaking Bad.” It came equipped with a 3.4-liter V6 that made 185 horsepower and sent it through a four-speed automatic to the front wheels, with an all-wheel drive version also available. The Aztek may have the last laugh, especially if it gets a screaming chicken. “The fact it was a controversial design and didnÂ’t sell well will make it an object of curiosity from a historical standpoint many years from now,” McKeel Hagerty, president and CEO of classic-car insurer Hagerty Insurance, told Autoblog back in 2016.

Steve McQueen barn find: Movie Trans Am surfaces after almost 40 years

An important Steve McQueen film car has emerged from barn storage. No, it's not yet another " Bullitt" Mustang, quite the contrary: The car in question is a 1980 Pontiac Trans Am, and it starred in McQueen's final film, " The Hunter." In the movie, McQueen plays a bounty hunter, and while in " Bullitt" he's quite the wheelman, that's not the case in this one. McQueen's character, "Papa" Thorson, is a horrible driver, and the Trans Am is far too much car for him. A chase sequence sees McQueen driving a combine harvester to catch the perps who are driving his stolen rental Pontiac, and the Trans Am ends up blown in half with dynamite, then returned to the airport on a trailer. The driver of said GMC truck and trailer combination, Harold McQueen (no relation), received the title of the first car used in filming, and for the following decades planned to fix the now-ruined car, but never got around to it. Instead, the 1,300-mile Pontiac wreck sat on a farm for nearly 40 years, until Harold decided to sell it to an enthusiast. There's studio documentation proving the car's pedigree, and stunt modifications can be seen in the Pontiac's floor and dash. While it's obviously in dreadful condition, the car remained more intact than the other stunt car the film crew blew up even more spectacularly — that car ended up as the pile of parts in the airport scene, and those bits and pieces were eventually dropped off at a junkyard after a Pontiac dealer refused them. McQueen did also drive a 1951 Chevrolet in the film, and kept that yellow convertible after filming was wrapped up. Sadly, he was diagnosed with cancer just a month later, after reportedly being in poor health during the shooting, and passed away in December 1980. The yellow Chevy stayed with his estate for some years, later getting restored and auctioned. Right now, it's not clear what the Trans Am's fate will be. The car's current owner, Calvin Riggs from Carlyle Motors in Katy, Texas, wants to know more about the Trans Am and the film shoot: His post on Hemmings includes a lot of information, but more would be useful. Related Video:

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...