2004 Pontiac Vibe Toyota Matrix on 2040-cars

Auto blog

GM knew about fatal Chevy ignition problem decade before recall

Well, this is not good for General Motors. Following a report last week that GM was recalling 778,000 Chevrolet Cobalt and Pontiac G5 compacts over concerns that the ignition could switch out of the "run" position without warning, USA Today reports that the Detroit-based behemoth knew about the issue, which affected 2005 to 2007 Cobalts (the Cobalt shown above and in the gallery is from 2010) and 2007 Pontiac G5s, all the way back in 2004.
The information comes from a deposition in a civil lawsuit against GM, obtained by USA Today, which claims that a GM engineer experienced the issue while the then-new model was undergoing testing. The issue was "solved" when a technical service bulletin was issued in 2005, informing dealers to install a snap-on key cover on the cars of customers who complained about the issue. According to the Cobalt's program engineering manager, Gary Altman, the cover was an "improvement, it was not a fix to the issue."
The case where the depositions were made was from 2010, and involved Brooke Melton, a 29-year-old pediatric nurse in Georgia who was killed on her birthday. At the time, police claimed she was going too fast on a wet, rural road, although it later came out through the black box that her car's ignition had come out of the "run" position at least three seconds before the accident (the max amount of time a black box records before a wreck), disabling her airbags, power steering and anti-lock brakes. According to USA Today, police said Melton was "traveling too fast for the roadway conditions," although it's impossible to know if she'd have been in the wreck, which injured the occupants of another vehicle, had her 2005 Chevy not shut off. GM settled the Melton family's case, although the details remain confidential.

This junkyard '91 Grand Am is as hooptie as it gets

I spend a lot of time in junkyards. A lot of time. With all this experience, I have learned to recognize a perfect hooptie when I see one, a car whose final owner got every last bit of use out of it when its value was hovering right about at scrap value. This 1991 Pontiac Grand Am that I spotted in a San Francisco Bay Area self-service wrecking yard a few days ago, from the final model year for the third-generation Grand Am, checks all the hooptie boxes just right. First of all, it's a low-option coupe with the wretched and unloved GM Iron Duke engine, a rattly, gnashy, thrashy 2.5-liter four-cylinder kludged together using off-the-shelf parts from the Pontiac 301-cubic-inch V8 during the darkest years of the Malaise Era and used in cars whose buyers just didn't care. Most of the paint has been burned off by 25 years of harsh California sun, but the car spent sufficient time in a damp, shady spot for lichens to build up here and there. There are skeletons-with-sombreros stencils sprayed here and there, plus a big moonshine-guzzling skeleton mural painted on the hood. Goodbye, property values! Still, someone felt some affection for this car, giving it the name "Good Ol' Snakey" and painting that name on the decklid. We can assume that the Iron Duke was a bit loose by this time, probably leaving a serpentine trail of blue smoke behind the car at all times. So, the combination of cheapness, ugliness, menace, and who-gives-a-damn functionality make this Grand Am an excellent example of a pure hooptie. Within a couple of months, it will be crushed, shredded, shipped out of the Port of Oakland, and reborn in China as refrigerators and Geely Emgrands. Somewhere in Northern California, though, a few of Ol' Smokey's friends will remember this car fondly.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...