2002 Firebird Trans Am Ws6 on 2040-cars

Auto blog

Junkyard Gem: 1997 Pontiac Sunfire SE Convertible

For the entire 24-year production run of the GM J platform (best known for the Chevrolet Cavalier), the Pontiac Division offered new J-Body cars for sale in the United States. First there was the J2000, followed in quick succession by the 2000, 2000 Sunbird and Sunbird. The Sunbird stuck around until the Cavalier got a major redesign for the 1995 model year, at which point Pontiac changed the car's name to Sunfire. Today's Junkyard Gem is one of those early Sunfires, a top-of-the-line SE convertible with the optional big engine and manual transmission. The Sunfire was an extremely close sibling to the same-year Cavalier (by the late 1980s, all the other US-market GM divisions had dropped their J-cars, which meant no more Skyhawks, Cimarrons or Firenzas), quite difficult to distinguish from its near-twin at a glance. The base engine for the 1997 Sunfire convertible was the pushrod 2.2-liter straight-four that powered so many J-bodies of the 1990s. That engine produced just 120 gnashing, valve-floating horsepower, not much by late-1990s standards. For a mere 450 additional dollars, however, the 2.4-liter Twin Cam engine and its high-revving 150 horses could be had by '97 Sunfire buyers. That's what's in this car. This is one of the members of the Oldsmobile Quad 4 family, though some fanatics will yell at you if you apply that name to the versions that don't have big QUAD 4 lettering cast into the valve cover. This is the most powerful engine ever used in production Sunfires. For 1997, Pontiac offered a four-speed automatic transmission for no extra cost in the Sunfire convertible. Buyers of all other Sunfire models that year had to shell out either $550 or $810 ($1,026 or $1,511 in 2023 dollars) for a two-pedal rig. That means that the buyer of this car really wanted the five-speed manual transmission (or just hungered for the $810 credit offered in the fine print for takers of the manual). Plenty of free-breathing engine power, five-on-the-floor driving enjoyment and the open skies above. What a fun car! This one made it to nearly 180,000 miles. For this car with the Quad 4 under the hood and a clutch pedal on the floor, the MSRP was $18,539 (about $34,584 today). Its Cavalier LS convertible twin with the same engine/transmission setup cost $17,365 ($32,394 now). This car has a bunch of options, including the 15" Rally aluminum wheels, so the out-the-door price would have been higher. The last year for the Sunfire was 2005, same as the Cavalier.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

This 1927 Oakland is a minimalist hot rod

There are hundreds of American automakers that sprung up during the dawn of the automotive era, only to fold into obscurity or get gobbled up by what would eventually become the Big Four (yes, we're counting AMC here). Oakland is one such company, which was the forbearer for General Motors' Pontiac division. Sold until 1931, you simply don't see Oakland-badged cars anymore. Unless, that is, you know Brian Bent.
Bent drives a 1927 Oakland that still rides on wooden wheels. Its original wooden wheels, from the sound of it. That makes this anachronist and his Oakland the perfect subject for a Petrolicious video. Like many of the cars highlighted by Petrolicious, this old Oakland has had some work done to it, featuring a Pontiac flathead engine that's been pushed forward and a clutch pack built by Bent.
Take a look below for a closer look at this rare and fascinating Oakland.