2004 Pontiac Montana on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Toyota urges owners of old Corolla, Matrix and RAV4 models to park them until airbags are replaced

DETROIT — Toyota and General Motors are telling the owners of about 61,000 older Corolla, RAV4, Matrix/ Pontiac Vibe models to stop driving them because their Takata airbag inflators are at risk of exploding and hurling shrapnel. The urgent warning Monday covers: Certain Corolla compact cars and Matrix hatchbacks from the 2003 and 2004 model years. RAV4 small SUVs from 2004 and 2005. Also covered are about 11,000 Pontiac Vibes from 2003 and 2004, which are essentially the same as the Matrix and were made at the same California factory. Most of the vehicles are in the U.S. “If the airbag deploys, a part inside is more likely to explode and shoot sharp metal fragments, which could cause serious injury or death to the driver or passengers,” Toyota said in a statement. Owners can go to nhtsa.gov/recalls and enter their 17-digit vehicle identification number to see if their cars are affected. If you're not the original owner of the vehicle, the manufacturer's recall letter might not reach you, so be sure to do the VIN check. The recalled RAV4s have Takata driver's airbags while the Corolla and Matrix models have them on the passenger side. The Corolla and Matrix also are under a separate recall because their airbags can be deployed without a crash, the company said. Both companies said owners should contact a local dealer instead of driving the cars in for repairs. Dealers will provide options such as mobile repair, towing the car to a dealer, or vehicle pickup and delivery. Takata used volatile ammonium nitrate to create a small explosion to inflate airbags in a crash. But the chemical propellant can deteriorate over time when exposed to high temperatures and humidity. It can explode with too much force, blowing apart a metal canister and spewing shrapnel. At least 26 people have been killed in the U.S. by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. In addition, about 400 people have been injured. The exploding airbags sent Takata of Japan into bankruptcy. The potential for a dangerous malfunction led to the largest series of auto recalls in U.S. history. About 100 million inflators were recalled worldwide. Recalls Pontiac Toyota Takata airbag recall