1974 Pontiac Lemans Luxury 6.6l Custom Built 400 Brand New Wheels/tires on 2040-cars

Auto blog

Junkyard Gem: 2003 Pontiac Grand Am GT 30th Anniversary Edition

With the era of the 1960s-style muscle car ended by the ever-more-stringent emissions regulations, insurance costs and higher gasoline prices of the early 1970s, GM's Pontiac Division was ready with a lineup of flash-enhanced machines packed with (alleged) European-style performance and styling. Three of them were based on the midsize A Platform for 1973: the LeMans, the Grand Prix and the brand-new Grand Am. The 1973 Grand Am was cheaper than the luxed-up Grand Prix, but still had a BMW-ish interior and wild exterior styling; sales weren't great, but the 30th anniversary of this car seemed sufficiently momentous for Pontiac to create a special-edition package for its soon-to-be-axed successor. Here's one of these rare machines, spotted recently in a Denver car graveyard. The original rear-wheel-drive Grand Am was built for the 1973-1975 and 1978-1980 model years, but its similarity to the much cheaper LeMans kept sales numbers unimpressive. When the Grand Am name was revived for a Pontiac-badged compact on the front-drive N Platform in the 1985 model year, however, it became a big seller right away and stayed that way into our current century. The N-Body Grand Am was built through 2005, with platform updates for the 1992 and 1999 model years. Along the way, it was sibling to such cars as the Oldsmobile Calais, Buick Somerset, Chevrolet Beretta and Oldsmobile Alero. By 2003, though, the ground was shifting under Pontiac's feet. The iconic Firebird had been discontinued the previous year, and even the Grand Prix's days were officially numbered. Oldsmobile would be gone after 2004, and the entire Pontiac vehicle lineup would be shaken up soon after. The last year for the Grand Am (and the Sunfire) would be 2005, with the G6 taking its place. With all that going on, why not offer a 30th Anniversary package? After all, the Grand Prix got a 40th Anniversary Edition for 2002. Our reviewer described this car as "leaner, trimmer and more contemporary" at the time, but made no mention of the 30th Anniversary Edition. The VIN says this car is a top-grade GT1 sedan, with an MSRP of $22,325 (that's about $39,920 in 2023 dollars). Two engines were available in the 2003 Grand Am: a 2.2-liter Ecotec four-cylinder with 140 horsepower and a 3.4-liter pushrod V6 with either 170 or 175 horsepower. This car has the 175-horse V6, complete with "Ram Air" cold-air induction. That name goes way back in Pontiac history.

Junkyard Gem: 2002 Pontiac Aztek

The General's Pontiac Division sold the Aztek for the 2001 through 2005 model years, and — despite enjoying something of a cultural rebirth in recent years — it is generally considered to be one of the worst cars of all time. The idea of using a minivan platform as the basis for a rough-and-tough-looking crossover with plenty of outdoor-lifestyle amenities wasn't the problem, since many vehicle manufacturers have printed bales of money using that formula. What doomed the Aztek was its hideous appearance and sticker price too lofty for its underemployed-at-the-time Generation X target demographic. Still, the Aztek proved to be perfectly suited for the outdoor activities that Coloradans love: hiking, camping, fishing, skiing, hauling mud-caked golden retrievers around, etc., and so you'll still find lots of Azteks on the roads of the Centennial State. Here's an Aztek Yellow Aztek (yes, that's really the paint color's official title) residing just a few rows from a '76 Checker Taxicab in a Denver self-service yard. Sure, it does look like a vehicle built to the specifications of a six-year-old who decreed a mashup between a Datsun F-10 and a Fisher-Price Little People Travel Together Airplane, but so what? There's a built-in air compressor to blow up your inflatable rafts and volleyballs, a tent attachment that turns the rear of the van into a camper, 12-volt power plugs all over the vehicle (years before this became commonplace on ordinary minivans and SUVs), and running-gear commonality with a jillion Ventures, Silhouettes, Montanas and Trans Sports. Buick managed to de-uglify the Aztek (somewhat) and sold it as the Rendezvous through 2007, but the Aztek never could win over many people with this face. I see plenty of Azteks and Rendezvouses in Denver-area wrecking yards, and I've documented a handful over the years. This one came fully loaded from the factory, with the Corvette-style heads-up display in full effect. The center console was a removable cooler, which was a great idea Â… except for the fact that this cooler holds five standard 12-ounce cans. Michigan residents tell me that this must have been intentional on the part of the Detroit-based Aztek designers, because Michiganders are expected to chug one beer out of a sixer as they walk from the liquor store to the car in the parking lot Â… which makes me extra cautious whenever I'm driving in the Wolverine State.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...