Gxp 5.3l Cd Traction Control Stability Control Front Wheel Drive Aluminum Wheels on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

700 horsepower Porsche GT2 RS is the wildest 911 ever

The Porsche 911 comes in a variety of flavors, each filling a certain taste for a certain customer. Sitting atop the range is the new 911 GT2 RS. In previous generations, the GT2 had a bit of a reputation as a widowmaker, a 911 with massive power that could snap and bite with the slightest agitation. Porsche says the new model has been civilized, but with 700 horsepower going to the rear wheels, we're sure it's going to be as mad as ever. Power comes from a highly massaged version of the 3.8-liter flat-six from the 911 Turbo S. The rear-mounted engine makes an outrageous 700 horsepower and 553 lb-ft of torque. Like we previously reported, the new car will use water injection to help keep things cool. The only transmission is Porsche's PDK. While enthusiasts may lament the loss of the manual, the RS models have always been about performance above all else. Simply put, the PDK is the better performance option. All that power translates to a 0-60 mph time of 2.7 seconds and a top speed of 211 mph. The engine makes 80 more horsepower than the previous model. That makes it the most powerful road-going 911 ever built. In fact, the 887 horsepower 918 Spyder is the only road-going Porsche that makes more power. The fact that Porsche trusts all of that power to go to the rear is both thrilling and terrifying at the same time. In order to manage traction, the GT2 RS gets a number of upgrades. Rear-wheel steering has become commonplace in the 911 lineup, so it's no surprise to see it here. Sticky tires with 265/35 ZR 20 section rubber at the front and 325/30 ZR 21 section rubber at the rear keep things planted. That comically large rear wing adds downforce, adding to stability. The car gets standard carbon ceramic brakes. While some people prefer traditional rotors for the street, like the PDK, this is all about performance. A number of intakes and outlets complement the rear wing and maximize aerodynamic efficiency. It's a bit of a surprise that with all the focus on downforce, the GT2 RS still manages to top out at 211 mph. The hood, front wings, wheel housing vents, door mirrors, side air intakes, parts of the rear end, and a number of interior components are all made from carbon fiber. The roof has been made of magnesium. If you want to drop any pretense of civility and comfort in the pursuit of speed, Porsche is offering a Weissach package that shaves off another 40 pounds from the already impressive wet weight of 3,241.

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.