2008 Grand Prix Gxp V8, Sunroof, Mercedes-benz Dealer, Rare Car, L@@k At Me!!! on 2040-cars

Auto blog

Pontiac should come back as a performance division for GM

For decades the Pontiac brand was known as GM's performance brand. From the 1964 Pontiac GTO, to the 1967 Firebird, to the 1984 Fiero, to the 2006 Solstice Turbo, and 2009 G8 GXP, Pontiac had a reputation for building exciting cars, with bold styling and performance to back it up. When the Camaro was killed off in 2002, the Pontiac Firebird died off with it, and the last Pontiacs were built in early 2010. But with names like G3, G4, and G6, Pontiac's performance image had long faded from it's earlier glory days. My idea for Pontiac's revival would be to bring it back as a dedicated performance marque similar to Chevy's Super Sport (SS) line up of years past. First, and most obvious would be to bring back the Pontiac Firebird. Offering the entry-level model with the Camaro's 275HP turbo 4 cylinder engine, then having the Camaro SS's 455HP V8, but also offering a halo model Trans Am that is a revamped Camaro ZL-1 along with it's tire-shredding 650HP, supercharged V8 and race tuned suspension. Secondly, I would bring back the GTO. Which I would base on the current Chevy SS, but I would use the full 455-horsepower LS4 V8 (rather than the 415-hp setup that it has now). Furthermore, I would add the impressive 650-hp supercharged V8 to provide real competition to the Charger Hellcat. Importantly, I would make sure that the new GTO had bold, distinctive styling that really set it apart. I understand that purists would want any Pontiac GTO to be a two-door coupe, but I think that they could forgive that if the new GTO was an outstanding American performance car. Next, I would take the Buick Cascada convertible, add much bolder styling, swap in the Camaro's 275-hp turbo engine, and tune up the suspension to provide more performance than luxury (without being harsh). And finally I would round out the line up by using the new 2018 Traverse , but use the new, bold Pontiac design language to spice up the model's looks, tweak the engines for more power, and again provide a performance suspension that matches the model's new sporty looks. Obviously, having a high performance Pontiac model line up would steal away some sales from Chevy, Buick, and Cadillac models. But I think that it would more than make up for this by also stealing away sales from competing brands. Related Video: Image Credit: Copyright 2012 Drew Phillips / AOL Pontiac Classics brands open road

Junkyard Gem: 1987 Pontiac Firebird

From 1967 through 2002, the Pontiac Division offered the Firebird, close sibling to the Chevrolet Camaro. By the third generation, which debuted for the 1982 model year, it became more difficult to tell the two F-body cars apart at a glance and the Pontiac-exclusive engines of the earlier years disappeared, but the Firebird still retained its own personality and its own position in the GM marketing hierarchy. I still find the occasional 1982-1992 Camaro as I search car graveyards for interesting stuff, but the corresponding Firebirds have become scarce in recent years. Here's a base-engine-equipped '87, its Bright Red paint (yes, that was the official name for the color) faded by the Colorado sun as it awaits the crusher. Firebird shoppers had their choice of three engines in 1987: A 5.7-liter Chevy V8 (210 hp), a 5.0-liter Chevy V8 (205 hp) and the same 2.8-liter 60° V6 that went into the Fiero and countless front-drive GM sedans (135 hp). This car has the base engine. The third-gen F-body didn't weigh much (3,105 pounds for the '87 with six-banger, about what a 2020 Corolla weighs), so 135 horses was tolerable. Plenty of these cars got T-5 5-speed manual transmissions, but this one got the two-pedal setup. Camaro wheels, of course. Our Friend the Carburetor didn't disappear from new cars until the early 1990s in the United States, though electronic fuel injection had become very commonplace by 1987. Still, GM considered this car's EFI worth a door-handle brag. It's not worth fixing up a mashed six-cylinder third-gen Firebird, so we can see the route this car took to its final parking space. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When you're about to be beaten to a pulp by catcalling, Olds-driving thugs, run to the Firebird! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So much big hair in these late-1980s Pontiac ads! Featured Gallery Junked 1987 Pontiac Firebird View 24 Photos Auto News Pontiac Automotive History Coupe Firebird pontiac firebird Junkyard Gems

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.